How to Replace Driver's Side CV Axle Assembly 2007-2015 Mazda CX-9
19.7 هزار بار بازدید -
2 سال پیش
-
Buy Now!New CV Axle Assembly
Buy Now!
New CV Axle Assembly from 1AAuto.com http://1aau.to/ib/1AACV00557
This video shows you how to install a driver's side CV axle assembly on your 2007-2015 Mazda CX-9. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2007 Mazda CX-9
2008 Mazda CX-9
2009 Mazda CX-9
2010 Mazda CX-9
2011 Mazda CX-9
2012 Mazda CX-9
2013 Mazda CX-9
2014 Mazda CX-9
2015 Mazda CX-9
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa72/1AXAA00013
• Pry Bar http://1aau.to/oK9/1AXAA00020
• 14mm Wrench http://1aau.to/oNY/1AXAA00010
• 18mm Wrench
• 10mm Socket http://1aau.to/oaSw/1AXAA00017
• 14mm Socket http://1aau.to/obax/1AXAA00015
• 18mm Socket http://1aau.to/o6C/1AXAA00043
• 21mm Socket http://1aau.to/o6C/1AXAA00043
• 35mm Socket http://1aau.to/oac/1AAST00005
• 36mm Socket http://1aau.to/obx/1AAST00006
• Bent Nose Pliers
• Torque Wrench http://1aau.to/oaq8/1AXAA00044
• Bearing Grease
• Gloves http://1aau.to/oGd/1AXSS00048
• Safety Glasses http://1aau.to/ozS/1AXAA00343
• Chisel http://1aau.to/oj2/1AXAA00055
• Drain Pan http://1aau.to/ouG/1AXAA00320
• Floor Jack http://1aau.to/oTp/1AXAA00068
• Hammer http://1aau.to/oNs/1AXAA00091
• Pole Jack
• Punch
• Rubber Mallet http://1aau.to/ofF/1AXAA00413
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New CV Axle Assembly from 1AAuto.com http://1aau.to/ib/1AACV00557
This video shows you how to install a driver's side CV axle assembly on your 2007-2015 Mazda CX-9. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2007 Mazda CX-9
2008 Mazda CX-9
2009 Mazda CX-9
2010 Mazda CX-9
2011 Mazda CX-9
2012 Mazda CX-9
2013 Mazda CX-9
2014 Mazda CX-9
2015 Mazda CX-9
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa72/1AXAA00013
• Pry Bar http://1aau.to/oK9/1AXAA00020
• 14mm Wrench http://1aau.to/oNY/1AXAA00010
• 18mm Wrench
• 10mm Socket http://1aau.to/oaSw/1AXAA00017
• 14mm Socket http://1aau.to/obax/1AXAA00015
• 18mm Socket http://1aau.to/o6C/1AXAA00043
• 21mm Socket http://1aau.to/o6C/1AXAA00043
• 35mm Socket http://1aau.to/oac/1AAST00005
• 36mm Socket http://1aau.to/obx/1AAST00006
• Bent Nose Pliers
• Torque Wrench http://1aau.to/oaq8/1AXAA00044
• Bearing Grease
• Gloves http://1aau.to/oGd/1AXSS00048
• Safety Glasses http://1aau.to/ozS/1AXAA00343
• Chisel http://1aau.to/oj2/1AXAA00055
• Drain Pan http://1aau.to/ouG/1AXAA00320
• Floor Jack http://1aau.to/oTp/1AXAA00068
• Hammer http://1aau.to/oNs/1AXAA00091
• Pole Jack
• Punch
• Rubber Mallet http://1aau.to/ofF/1AXAA00413
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش
در تاریخ 1401/11/18 منتشر شده
است.
19,753
بـار بازدید شده