Как зашить куртку потайным швом
426.8 هزار بار بازدید -
6 سال پیش
-
Spread the jacket along the
Spread the jacket along the seam. Need to sew it up. Ideally, of course, it’s best done on a typewriter. But in order to do this on a typewriter, you will first need to unpick the lining to get to the seam from the back side. But it will take a lot of time.
There is an easier option. I will sew this hole with a secret stitch. The blind seam is used in the manufacture of soft toys, sewing and repairing clothes. Here I use it. Such a seam simulates a machine seam. Threads are hiding inside, not from the outside.
That's what happens. The resulting seam is not visually different from the existing machine seam. The threads are under the material, although it was sewn outside.
In order to show in more detail how I sewed this stitch, for clarity, I will take a piece of light material with the same open seam, and sew it with black threads.
A needle is put under the seam allowance and the thread is pulled.
Stitches are made alternately on both sides and perpendicular to each other.
I made one puncture, I make the second puncture on the opposite side clearly opposite the first one.
Now I make a small stitch and stretch the thread. Again I turn to the opposite side and make a new puncture perpendicular to the existing one.
Need to pierce through the fold of the material.
The smaller the stitches, the more inconspicuous the seam will be.
After several stitches have been made, you need to pull the thread and the seam pulls together, and the threads will hide inside.
And this is how the entire seam is stitched.
At the end of the thread is fixed and cut off. Now you can admire the finished result or use the repaired item.
There is an easier option. I will sew this hole with a secret stitch. The blind seam is used in the manufacture of soft toys, sewing and repairing clothes. Here I use it. Such a seam simulates a machine seam. Threads are hiding inside, not from the outside.
That's what happens. The resulting seam is not visually different from the existing machine seam. The threads are under the material, although it was sewn outside.
In order to show in more detail how I sewed this stitch, for clarity, I will take a piece of light material with the same open seam, and sew it with black threads.
A needle is put under the seam allowance and the thread is pulled.
Stitches are made alternately on both sides and perpendicular to each other.
I made one puncture, I make the second puncture on the opposite side clearly opposite the first one.
Now I make a small stitch and stretch the thread. Again I turn to the opposite side and make a new puncture perpendicular to the existing one.
Need to pierce through the fold of the material.
The smaller the stitches, the more inconspicuous the seam will be.
After several stitches have been made, you need to pull the thread and the seam pulls together, and the threads will hide inside.
And this is how the entire seam is stitched.
At the end of the thread is fixed and cut off. Now you can admire the finished result or use the repaired item.
- #howto_style
- #
- #
- #
- #
6 سال پیش
در تاریخ 1397/09/27 منتشر شده
است.
426,877
بـار بازدید شده