How to Install a Delta® Classic 500 Tub Wall Set (60x32)

Follow along as Mike and Hannah walk through how to install the Delta® Classic 500 60x32 Tub. This video will also work for the Delta® Classic 500 Curve 60x32 Tub and the Delta® Classic 500 60x30 tub with left and right drain options.  See our supply list and video shortcuts below to make installing even easier.

You'll Need:
- Drill  
- Safety Glasses
- Caulk Gun
- Adhesive
- Sealant  
- Tape Measure
- Staple Gun
- Sill Plate Gasket
- Level  
- Square
- Shims  
- Drop Cloth
- Pencil
- Utility Knife  
- 3/16” Drill Bit
- Bit Holder Extension  
- Driver Bit
- Screws  
- Hole Saw  
- Lumber
- Gloves  
- Saw Horse

Steps:
0:00 Intro
3:00 Check for Plumb, Square & Level
4:51 Install Blocking
6:23 Install Door Nailers
8:55 Dry Fit Panels
18:04 Drill Pilot Holes
18:30 Install Fire Retardant Pad
19:41 Install Foam Tape
21:39 Install Back Panel
24:30 Install Side Panels

Check out these related videos:
How to Install the Delta® Classic 500 Tub (60x32) - How to Install the Delta® Classic 500...
How to Install a Delta® Classic 500 Curve Tub (60x32) - How to Install a Delta® Classic 500 C...

Check out this related playlist:
Bathtub and Shower Installations - Bathtub and Shower Installations