Vacuum Forming Custom Packaging for the Cyberspoon
215.7 هزار بار بازدید -
4 سال پیش
-
In a previous project video,
In a previous project video, I shared the genesis of the Cyberspoon: CNC Machining the Cyberspoon - A Perf...
In an attempt to provide protection for the Cyberspoon (should I ever decide to sell them), I decided to design and create some prototype plastic packaging. I modeled some bucks in Fusion 360, machined them out of Renshape, and vacuum-formed plastic sheets over them using the Mayku Formbox. I made several small mistakes throughout the process, like not venting concave features in my buck but ultimately overcame them.
The 14 Gal. Ridgid NXT Wet/Dry Shop Vacuum used in this project was provided by Home Depot and it is a serious workhorse. Check it out at: https://homedepot.sjv.io/gzg32
To learn more about the Formbox, head to: https://www.mayku.me/
——
Help support my experimental CNC content: Patreon: winstonmoy
I also make instructional content on the Carbide3D Channel: carbide3d
Stalk me on Social Media: @WinstonMakes (insta/twitter)
Tools I Use: http://www.winstonmakes.com/tools-i-use/
(Legal Blurb - By using my affiliate links, you are helping to support my content.)
In an attempt to provide protection for the Cyberspoon (should I ever decide to sell them), I decided to design and create some prototype plastic packaging. I modeled some bucks in Fusion 360, machined them out of Renshape, and vacuum-formed plastic sheets over them using the Mayku Formbox. I made several small mistakes throughout the process, like not venting concave features in my buck but ultimately overcame them.
The 14 Gal. Ridgid NXT Wet/Dry Shop Vacuum used in this project was provided by Home Depot and it is a serious workhorse. Check it out at: https://homedepot.sjv.io/gzg32
To learn more about the Formbox, head to: https://www.mayku.me/
——
Help support my experimental CNC content: Patreon: winstonmoy
I also make instructional content on the Carbide3D Channel: carbide3d
Stalk me on Social Media: @WinstonMakes (insta/twitter)
Tools I Use: http://www.winstonmakes.com/tools-i-use/
(Legal Blurb - By using my affiliate links, you are helping to support my content.)
4 سال پیش
در تاریخ 1399/07/16 منتشر شده
است.
215,730
بـار بازدید شده