DIY 20 Ton Hydraulic Shop Press | Made with Scrap Metal And Basic Tools

Garage Hobbyist
Garage Hobbyist
1.3 هزار بار بازدید - 2 سال پیش - Follow along as I recap
Follow along as I recap the DIY 20 Ton Shop Press made from scrap metal using only basic tools.  This press uses a 20 Ton Pittsburgh bottle jack from Harbor Freight.  Watch until the end, there is an epic failure, and a fix!
#harborfreight #welding #weldingprojects

This description may contain affiliate links in which I earn a small commission at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.
https://www.amazon.com/shop/garagehob...

Tools Used in this Project (affiliate links):
Simder Mig140 Flux Welder - https://amzn.to/3ira5I6
Spyder hole Saw Kit - https://amzn.to/3WVVcgk
Yeswelder TIG-205DS - https://amzn.to/3VLLSuA
YesWelder Large View Welding Hood - https://amzn.to/3VRnBU0
Metabo HPT Grinder - https://amzn.to/3iraURc
Benchmark Abrasives Flap Discs - https://amzn.to/3OZrnZ3
Eastwood Rod Forming Tool - https://amzn.to/3OXwzNb

🎙🎙Podcast Links:
Spotify: https://open.spotify.com/show/468HSez...
Apple Podcasts: https://podcasts.apple.com/us/podcast...
Everywhere Else: https://anchor.fm/garagehobbyist

www.garagehobbyist.com

Recording Gear (Affiliate):
Cameras:
Anker C200 USB Camera - https://amzn.to/3dpJbhI
iPhone 13 - https://amzn.to/3DUt7j5
Canon 80D - https://amzn.to/3xxoBD1
Canon T4i
Tamron SP 24-70mm F/2.8 Di VC USD G2 - https://amzn.to/3KoeKTL

Microphones:
Samsung Q9U Dynamic USB/XLR Mic - https://amzn.to/3WO5PB3
Deity D-4 Mini Microphone - https://amzn.to/37GTrPR
2 سال پیش در تاریخ 1401/09/13 منتشر شده است.
1,335 بـار بازدید شده
... بیشتر