Precise Zero Setting Without a Touch Probe on Your CNC Bits
49.4 هزار بار بازدید -
4 سال پیش
-
This video tutorial explains how
This video tutorial explains how to set up your CNC router bit start point, or zero point, for XYZ for your CNC router projects. You will learn how to set the X Y Z zero locations to the exact start point of your project.
Be sure to check the links below for other CNC router tutorials and Vectric software tutorials.
Setting X & Y time stamp: 7:28
Setting a router bit to the exact corner is easy and can be done fast without the use of a tool touch probe. This technique is used by professional CNC machinists routinely. In the times when they needed higher precision, that's when they use probes to assist.
As a CNC beginner (or even a pro,), this method is completely adequate for woodworking projects done on a CNC router.
Setting the zero point is easy.
Know the diameter of the tool
1. Use the paper method to set the Z height
2. Touch the edge of the material while turning the tool by hand. When you feel the tool touch, stop and set zero
3. Touch the other edge of the material in the same manner and set zero
4. Raise the tool above the Z surface
5. Enter in the command line "G20" (if you use inches), "G21" (millimeter) and hit enter
6.Divide the tool diameter by 2 (example...0.25 tool is 0.125 when divided by 2)
→ 0.125 is used in the example below. Make sure to enter your divided number
7. In the command line enter "G0 G90 X0.125 Y0.125" and hit enter
8. Set X and Y to Zero on your controller.
Your exact position is now set
This was shown on a BobsCNC CNC Evolution 4 (E4 EV4) using universal code sender software (ugs) although I do not recommend wood-frame CNC routers as they do not have the necessary rigidity.
My recommendation is the Longmill CNC router as a robust yet economical machine
To see a review video on the Longmill, go here → Longmill CNC Router - Complete Review...
LONGMILL CNC ROUTER WEBSITE:
https://sienci.com/product/longmill-m...
------------------------------------------------------
ROUTER BITS FOR CNC ROUTERS
→ 11pc carbide CNC router bit set (w/ free vector files) https://www.idcwoodcraft.com/11P-SET-W
→ 1” Surfacing bit required for surfacing your spoil board: https://www.idcwoodcraft.com/SU-10
→ Glass engraving drag bit: https://www.idcwoodcraft.com/ED-14
-----------------------------------------------------
OTHER ‘MUST HAVES’ FOR CNC ROUTERS
→ Calipers: https://amzn.to/338MAt3
→ Hearing protection (plugs don't work): https://amzn.to/2Hs1RgW
------------------------------------------------------
Recommended Design Software
→ Vcarve Pro (RECOMMENDED)→ https://bit.ly/3d4WrEU
→ Vcarve Desktop → https://bit.ly/3D4CwjH
→ Vectric Aspire → https://shrsl.com/37pw9
→ Cut2D Desktop → https://shrsl.com/36xfm
→ Carveco (budget) → https://bit.ly/37rhVbY
-----------------------------------------------------
MASTER YOUR VECTRIC SOFTWARE with Kyle at Learn Your CNC
Take the full course ↓
https://academy.learnyourcnc.com/a/21...
Get Weekly LIVE Training ↓
https://academy.learnyourcnc.com/a/21...
___________________________
Starbond CA Glue Products
GET 10% OFF when you use this discount code: IDCWOODCRAFT10
---------------------------------------------
_____________________________
MAKING MONEY WITH A CNC
Words are the top-selling items of all time with CNC products. Get the free WORDS THAT SELL list: https://idcwoodcraft.com/cnc-lp-1/
Join CNC ENTREPRENEURS Facebook group: Facebook: cncentrepreneurs
------------------------------------------------------
CNC FREE STUFF AND MORE
CNC Insiders sign up (free files and more): https://idcwoodcraft.com/cnc-lp2-free...
------------------------------------------------------
NEW TO CNC OR STUCK IN A PROJECT?
Schedule one-on-one time with me: https://idcwoodcraft.com/for-beginners/
------------------------------------------------------
PLAYLISTS
CNC FOR BEGINNERS: https://bit.ly/3rg4WTl
CNC ENTREPRENEURS: https://bit.ly/3mxz6Ok
VECTRIC VCARVE & ASPIRE TUTORIALS FOR BEGINNERS: https://bit.ly/3pdmFsi
------------------------------------------------------
If you currently own a CNC router, please take a moment to take this survey to share your experience with it: https://bit.ly/3r5XzNh
------------------------------------------------------
Please support IDC Woodcraft Youtube channel:
Buy me a cup of coffee: https://www.buymeacoffee.com/garrettf...
------------------------------------------------------
Cool vector files for CNC router & CNC laser: https://etsy.me/3oxX79l
------------------------------------------------------
CNC FOR BEGINNERS PODCAST: https://anchor.fm/cnc-for-beginners
------------------------------------------------------
Garrett Fromme
Facebook: https://fb.me/IDCWoodcraft
Website: www.idcwoodcraft.com
Email: [email protected]
Be sure to check the links below for other CNC router tutorials and Vectric software tutorials.
Setting X & Y time stamp: 7:28
Setting a router bit to the exact corner is easy and can be done fast without the use of a tool touch probe. This technique is used by professional CNC machinists routinely. In the times when they needed higher precision, that's when they use probes to assist.
As a CNC beginner (or even a pro,), this method is completely adequate for woodworking projects done on a CNC router.
Setting the zero point is easy.
Know the diameter of the tool
1. Use the paper method to set the Z height
2. Touch the edge of the material while turning the tool by hand. When you feel the tool touch, stop and set zero
3. Touch the other edge of the material in the same manner and set zero
4. Raise the tool above the Z surface
5. Enter in the command line "G20" (if you use inches), "G21" (millimeter) and hit enter
6.Divide the tool diameter by 2 (example...0.25 tool is 0.125 when divided by 2)
→ 0.125 is used in the example below. Make sure to enter your divided number
7. In the command line enter "G0 G90 X0.125 Y0.125" and hit enter
8. Set X and Y to Zero on your controller.
Your exact position is now set
This was shown on a BobsCNC CNC Evolution 4 (E4 EV4) using universal code sender software (ugs) although I do not recommend wood-frame CNC routers as they do not have the necessary rigidity.
My recommendation is the Longmill CNC router as a robust yet economical machine
To see a review video on the Longmill, go here → Longmill CNC Router - Complete Review...
LONGMILL CNC ROUTER WEBSITE:
https://sienci.com/product/longmill-m...
------------------------------------------------------
ROUTER BITS FOR CNC ROUTERS
→ 11pc carbide CNC router bit set (w/ free vector files) https://www.idcwoodcraft.com/11P-SET-W
→ 1” Surfacing bit required for surfacing your spoil board: https://www.idcwoodcraft.com/SU-10
→ Glass engraving drag bit: https://www.idcwoodcraft.com/ED-14
-----------------------------------------------------
OTHER ‘MUST HAVES’ FOR CNC ROUTERS
→ Calipers: https://amzn.to/338MAt3
→ Hearing protection (plugs don't work): https://amzn.to/2Hs1RgW
------------------------------------------------------
Recommended Design Software
→ Vcarve Pro (RECOMMENDED)→ https://bit.ly/3d4WrEU
→ Vcarve Desktop → https://bit.ly/3D4CwjH
→ Vectric Aspire → https://shrsl.com/37pw9
→ Cut2D Desktop → https://shrsl.com/36xfm
→ Carveco (budget) → https://bit.ly/37rhVbY
-----------------------------------------------------
MASTER YOUR VECTRIC SOFTWARE with Kyle at Learn Your CNC
Take the full course ↓
https://academy.learnyourcnc.com/a/21...
Get Weekly LIVE Training ↓
https://academy.learnyourcnc.com/a/21...
___________________________
Starbond CA Glue Products
GET 10% OFF when you use this discount code: IDCWOODCRAFT10
---------------------------------------------
_____________________________
MAKING MONEY WITH A CNC
Words are the top-selling items of all time with CNC products. Get the free WORDS THAT SELL list: https://idcwoodcraft.com/cnc-lp-1/
Join CNC ENTREPRENEURS Facebook group: Facebook: cncentrepreneurs
------------------------------------------------------
CNC FREE STUFF AND MORE
CNC Insiders sign up (free files and more): https://idcwoodcraft.com/cnc-lp2-free...
------------------------------------------------------
NEW TO CNC OR STUCK IN A PROJECT?
Schedule one-on-one time with me: https://idcwoodcraft.com/for-beginners/
------------------------------------------------------
PLAYLISTS
CNC FOR BEGINNERS: https://bit.ly/3rg4WTl
CNC ENTREPRENEURS: https://bit.ly/3mxz6Ok
VECTRIC VCARVE & ASPIRE TUTORIALS FOR BEGINNERS: https://bit.ly/3pdmFsi
------------------------------------------------------
If you currently own a CNC router, please take a moment to take this survey to share your experience with it: https://bit.ly/3r5XzNh
------------------------------------------------------
Please support IDC Woodcraft Youtube channel:
Buy me a cup of coffee: https://www.buymeacoffee.com/garrettf...
------------------------------------------------------
Cool vector files for CNC router & CNC laser: https://etsy.me/3oxX79l
------------------------------------------------------
CNC FOR BEGINNERS PODCAST: https://anchor.fm/cnc-for-beginners
------------------------------------------------------
Garrett Fromme
Facebook: https://fb.me/IDCWoodcraft
Website: www.idcwoodcraft.com
Email: [email protected]
4 سال پیش
در تاریخ 1399/10/25 منتشر شده
است.
49,487
بـار بازدید شده