How to reset error code on Sharp AR-5316 photocopier

Sharp AR-5316 error code H4-00 trouble
Service manual ...
Heat roller low temperature detection
When the fusing temperature is lower than 150C° after 55sec from the start of warming up. When the warming up complete temperature is not reached in 30sec from reaching 150C°. When the fusing temperature is lower than 100C° after 20sec from ready start. When the fusing temperature is lower than 145C° when printing." Thermistor abnormality Heater lamp abnormality Thermostat abnormality Control PWB abnormality
pressing "#" key then "interrupt" key then "C" key then "interrupt" key again. enter 14 then press start: https://www.coronatechnical.com/2019/...

Download error code: https://www.coronatechnical.com/2019/...

For more copier solution update.... Click on below links...
photocopiertechnical

Website..
https://www.coronatechnical.com

Facebook..
Facebook: electrotechnet

• #people_blogs
• #sharp_error_reset
• #error_reset
• #service_manual
• #fixing_error
• #clear
• #sharp_ar
• #5316