Spot Welding Aluminum Sheets

Related Product: https://sunstonewelders.com/products/...
Related Product: https://sunstonewelders.com/products/...

The corrugated aluminum sheet is attached to the base sheet using the CD630DPM2 set at 380ws energy.  The PASP-HP is configured with 1awg cables and an 1/8" copper electrode with a slightly tapered tip.  Welds are quick and easy to perform as can be seen in the video.  It is helpful to keep the flat tip of the electrode level with the work piece during the weld since uneven pressure can cause sticking or blow through.

Resulting welds are strong and a pull test shows good nugget size with some flagging.  

The CD630DPM2 is ideal for performing your aluminum sheet welds.  The PASP-HP allows operators to quickly place welds in hard to reach locations but an opposed type weld head such as the WH1125A would be ideal since there is greater control over electrode positioning and force (less chance of operator error).

Let us know if you have any questions.
Call or Text: +1-801-658-0015
Email: [email protected]
Website: https://SunstoneWelders.com

• #science_technology
• #aluminum
• #resistance_welding
• #cd600dp
• #pasp_hp
• #sheet_to_sheet