Hobart 125 EZ EZ125 welder review handler flux-cored
20.3 هزار بار بازدید -
8 سال پیش
-
A review of the Hobart
A review of the Hobart Welder Handler 125 (flux cored wire)
Rugged and portable,
The Handler® 125 operates off 115-volt household current. Comes ready to weld without shielding gas using .030-.035 in (0.8-0.9 mm) flux cored wire. For greater versatility, upgrade the Handler 125 with the optional MIG conversion kit for welding with .023-.030 in (0.6-0.8 mm) solid wire and gas shielding. Use C-25 gas (75% argon/25% CO2) on 24 gauge - 1/8 in steel for a cleaner weld with less spatter. Use Tri-Mix gas and stainless wire for welding on 16-12 gauge stainless steel
•Comfortable 8 ft. (2.4 m) H-9B gun with liner for .023-.035 in (0.6-0.9 mm) wire
•.030 in. (0.9 mm) contact tips
•10 ft. (3 m) work cable with clamp
•Sample spool of .030 in. (0.9 mm) self-shielded flux cored wire
•Spool shaft to accommodate 4 in spools (Optional hub kit available for 8 in spools)
•Power cord with plug
Power: •CV
•DC
•1 Phase
Processes: MIG or Flux Cored
Material Thickness: Welds 20 gauge up to 3/16 inch
Skill Level: Low
Applications: •Farm/Ranch
•Light Maintenance and Repair
•Light Fabrication
•Welds 24 gauge up to 3/16 inch steel with flux cored wire
•Proven built-in wire feeder with quick-release drive roll tension lever
•Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding.
•Four output voltage settings with wire feed speed tracking provide quick and easy adjustment for different materials and thickness.
•Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6mm) and .030 - .035 in. (0.6 - 0.9 mm) wire
•Self-resetting thermal overload and motor protection
Rugged and portable,
The Handler® 125 operates off 115-volt household current. Comes ready to weld without shielding gas using .030-.035 in (0.8-0.9 mm) flux cored wire. For greater versatility, upgrade the Handler 125 with the optional MIG conversion kit for welding with .023-.030 in (0.6-0.8 mm) solid wire and gas shielding. Use C-25 gas (75% argon/25% CO2) on 24 gauge - 1/8 in steel for a cleaner weld with less spatter. Use Tri-Mix gas and stainless wire for welding on 16-12 gauge stainless steel
•Comfortable 8 ft. (2.4 m) H-9B gun with liner for .023-.035 in (0.6-0.9 mm) wire
•.030 in. (0.9 mm) contact tips
•10 ft. (3 m) work cable with clamp
•Sample spool of .030 in. (0.9 mm) self-shielded flux cored wire
•Spool shaft to accommodate 4 in spools (Optional hub kit available for 8 in spools)
•Power cord with plug
Power: •CV
•DC
•1 Phase
Processes: MIG or Flux Cored
Material Thickness: Welds 20 gauge up to 3/16 inch
Skill Level: Low
Applications: •Farm/Ranch
•Light Maintenance and Repair
•Light Fabrication
•Welds 24 gauge up to 3/16 inch steel with flux cored wire
•Proven built-in wire feeder with quick-release drive roll tension lever
•Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding.
•Four output voltage settings with wire feed speed tracking provide quick and easy adjustment for different materials and thickness.
•Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6mm) and .030 - .035 in. (0.6 - 0.9 mm) wire
•Self-resetting thermal overload and motor protection
8 سال پیش
در تاریخ 1395/01/12 منتشر شده
است.
20,317
بـار بازدید شده