EPLAN PROPANEL Conditional forms for Terminal diagrams
2.7 هزار بار بازدید -
4 سال پیش
-
In EPLAN, ProPanel, Fluid and
In EPLAN, ProPanel, Fluid and PrePlanning you may regenerate reports with graphical representation that are controlled by "conditional forms". Here I show you how you adapt a terminal diagram which can serve the wiring of all your terminals... I will show a graphic of a specific part number when that part number is used in my strip. Here we are talking about a simple terminal, this is applicable to all forms in EPLAN. If you define this for every terminal type, part you use, you get a perfect graphical representation of your complete terminal strip with all connection. Makes it easier for wiring and testing later down the road. Any internal wiring and external wiring can be distinguished. On a big terminal strip, the terminals are easier to find when graphically recognizable. You can even use it to assemble the strip, similar to a "terminal line up".
These videos are made by EPLAN Canada, they may not reflect your way of doing schematics in your country, be insured we can do what you would like to see with EPLAN. These videos intend to show how things can be done, but are not in anyway the only way you can do things with EPLAN. Always ask your EPLAN representative for more details. Check out your nearest location on our EPLANCanada.com web site.
These videos are made by EPLAN Canada, they may not reflect your way of doing schematics in your country, be insured we can do what you would like to see with EPLAN. These videos intend to show how things can be done, but are not in anyway the only way you can do things with EPLAN. Always ask your EPLAN representative for more details. Check out your nearest location on our EPLANCanada.com web site.
4 سال پیش
در تاریخ 1399/10/18 منتشر شده
است.
2,703
بـار بازدید شده