Silver Brazing Stainless Steel to Brass with Silver Solder Paste from Muggy Weld
141.4 هزار بار بازدید -
12 سال پیش
-
A brass nut is silver
A brass nut is silver soldered to a stainless steel threaded bolt with SSQ-6 Silver Solder Paste from http://MuggyWeld.com
The parts have been pre-cleaned prior to adding the solder to the cold metal. Mike uses a propane torch to create a bond that is as strong as a MIG weld.
The SSQ-6 can be used to hide the silver solder joint. Just sandwich the past between the metals and heat to a dull red. The SSQ-6 can be applied to metals when red hot. This is necessary when working on thicker pieces as it can take too long to get to working temperature. The metals and flux in the paste will separate if it takes too long to get to the 1050°f
SSQ-6 works very well on pieces that are too small to weld. Avoid using the brass tips that aren't pushbutton trigger tips as they do not give the heat that propane is capable of providing.
#SSQ6 #SpecialtyWelding #SolderTips #HowToSolder #BrazeBrassToStainless #SolderBrassTo Stainless #SilverSolderVideo #SolderBoltToNut #PropaneTorchBrazing
Caution: Do not store near edible items. If you refrigerate SSQ-6, please store in a "chemical only" designated refrigerator.
Please read all instructions prior to use at: https://www.muggyweld.com/wp-content/...
For more videos and information, or to order, visit https://www.muggyweld.com/product/ssq...
_________________
Please visit http://www.aws.org/technical/facts/ prior to using Muggy Weld products, and adhere to all AWS welding safety guidelines. Further product safety information is available at http://muggyweld.com/safety-guidelines.
Muggy Weld LLC shall not be liable for any loss, injury, claim, liability, or damage of any kind resulting in any way from (a) your use of this Site, (b) any services or products obtained from this Site, (c) any errors in or omissions from this Site, (d) the unavailability or interruption of this Site or any features thereof, (e) any content contained on this Site.
MSDS sheets available with purchase from MuggyWeld.com, upon request.
The parts have been pre-cleaned prior to adding the solder to the cold metal. Mike uses a propane torch to create a bond that is as strong as a MIG weld.
The SSQ-6 can be used to hide the silver solder joint. Just sandwich the past between the metals and heat to a dull red. The SSQ-6 can be applied to metals when red hot. This is necessary when working on thicker pieces as it can take too long to get to working temperature. The metals and flux in the paste will separate if it takes too long to get to the 1050°f
SSQ-6 works very well on pieces that are too small to weld. Avoid using the brass tips that aren't pushbutton trigger tips as they do not give the heat that propane is capable of providing.
#SSQ6 #SpecialtyWelding #SolderTips #HowToSolder #BrazeBrassToStainless #SolderBrassTo Stainless #SilverSolderVideo #SolderBoltToNut #PropaneTorchBrazing
Caution: Do not store near edible items. If you refrigerate SSQ-6, please store in a "chemical only" designated refrigerator.
Please read all instructions prior to use at: https://www.muggyweld.com/wp-content/...
For more videos and information, or to order, visit https://www.muggyweld.com/product/ssq...
_________________
Please visit http://www.aws.org/technical/facts/ prior to using Muggy Weld products, and adhere to all AWS welding safety guidelines. Further product safety information is available at http://muggyweld.com/safety-guidelines.
Muggy Weld LLC shall not be liable for any loss, injury, claim, liability, or damage of any kind resulting in any way from (a) your use of this Site, (b) any services or products obtained from this Site, (c) any errors in or omissions from this Site, (d) the unavailability or interruption of this Site or any features thereof, (e) any content contained on this Site.
MSDS sheets available with purchase from MuggyWeld.com, upon request.
12 سال پیش
در تاریخ 1391/06/18 منتشر شده
است.
141,407
بـار بازدید شده