Tiling Toolpaths Part 1 – Design, Toolpath, and Save G-Code
7 هزار بار بازدید -
پارسال
-
More down here ↓↓↓ Click
More down here ↓↓↓ Click MORE!
In this video, I’ll introduce the subject of Tiling Toolpaths, using Vectric Aspire Version 11.5. I’ll first discuss what toolpaths actually is, and describe the reasons for tiling toolpaths. Then I’ll show you some things that need to be taken into consideration before tiling, such as mounting the material. I’ll then show you how I intend to mount my project, and discuss the complications that introduced to my overall design.
I’ll show you the entire toolpath tiling process, step by step, and discuss important considerations along the way. I’ll then wrap things up by showing you the finished project, and save the G-code for each toolpath.
As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.
On Sunday, June 25th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: https://youtube.com/live/Qo6el7ni0Co
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: https://paypal.me/MarkLindsayCNC
Direct link to more information on becoming a Channel Member: @marklindsaycnc
Thank you very much!
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: Vectric for the Absolute Beginner
Link to the 3D Modeling for the Absolute Beginner playlist: 3D Carving for Beginners
Link to the V-Carving for the Absolute Beginner playlist: V-Carving for the Absolute Beginner
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/p...
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
https://harnealmedia.com/
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com/
For more info, or to configure an Avid CNC of your own, visit their website: https://www.avidcnc.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#vectric #tiling #toolpaths
In this video, I’ll introduce the subject of Tiling Toolpaths, using Vectric Aspire Version 11.5. I’ll first discuss what toolpaths actually is, and describe the reasons for tiling toolpaths. Then I’ll show you some things that need to be taken into consideration before tiling, such as mounting the material. I’ll then show you how I intend to mount my project, and discuss the complications that introduced to my overall design.
I’ll show you the entire toolpath tiling process, step by step, and discuss important considerations along the way. I’ll then wrap things up by showing you the finished project, and save the G-code for each toolpath.
As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.
On Sunday, June 25th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: https://youtube.com/live/Qo6el7ni0Co
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: https://paypal.me/MarkLindsayCNC
Direct link to more information on becoming a Channel Member: @marklindsaycnc
Thank you very much!
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: Vectric for the Absolute Beginner
Link to the 3D Modeling for the Absolute Beginner playlist: 3D Carving for Beginners
Link to the V-Carving for the Absolute Beginner playlist: V-Carving for the Absolute Beginner
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/p...
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
https://harnealmedia.com/
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com/
For more info, or to configure an Avid CNC of your own, visit their website: https://www.avidcnc.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#vectric #tiling #toolpaths
پارسال
در تاریخ 1402/04/04 منتشر شده
است.
7,097
بـار بازدید شده