Setting the Float Level on a Holley Carburetor
22.3 هزار بار بازدید -
8 ماه پیش
-
Here is how to set
Here is how to set the float level on a double pumper Holley 750CFM. You only need two tools, a screwdriver and a 5/8 open end wrench. It is simple to do, but make sure you watch for any gas spillage from the fuel system. You can do it with the car running or not running, but I prefer to do it when it is running and on a level driveway. Make sure you check your carburetor manual to know if the float level should be at the bottom or middle of the window.
#diy
#holley
#carburetor
Don't Forget to Subscribe!
https://www.seevid.ir/c/SmackeysGar...
Don't forget to check us out on Instagram: Instagram: smackeysgarage
As an Amazon Associate I earn from qualifying purchases
All videos are for entertainment purposes only. Attempt these projects at your own risk! If you do, make sure you follow all manufacturers instructions!
#diy
#holley
#carburetor
Don't Forget to Subscribe!
https://www.seevid.ir/c/SmackeysGar...
Don't forget to check us out on Instagram: Instagram: smackeysgarage
As an Amazon Associate I earn from qualifying purchases
All videos are for entertainment purposes only. Attempt these projects at your own risk! If you do, make sure you follow all manufacturers instructions!
8 ماه پیش
در تاریخ 1402/09/11 منتشر شده
است.
22,398
بـار بازدید شده