Ryobi 18v One+ HP Hedge Trimmer Repair P2680

During my testing of the Ryobi P2680 Hedge Trimmer, the unit stopped working about 30 minutes into the test.  Basically, the loctite that had been applied to the fastener attaching the blades to the drive shaft failed, which let the screw to come loose and allowed the blades to become disengaged with the shaft, causing them to not move.  I will probably have to go back and tighten this again in the future.



Please also visit my other channel Morning Wood:
@youroldpalfernbark


As with any do-it-yourself project, unfamiliarity with the tools and process can be dangerous. This video should be construed as non expert, informational advice. I, will not be held responsible for any injury or damage due to the misuse or misunderstanding of any DIY project or videos. By Watching or following anything in this video, you assume all risks associated with using the experimental information or advice given, with a full understanding that you, solely, are responsible for anything that may occur as a result of putting this information into action in any way, and regardless of your interpretation of the advice.