Set a two-cord reference with the PXM/LXM MPO OLTS | How-To
183 بار بازدید -
پارسال
-
Watch this short tutorial on
Watch this short tutorial on how to set up a two-cord reference using EXFO's PXM/LXM MPO cable certifier and its onboard referencing wizard.
Learn more about EXFO's PXM/LXM - MPO optical loss test set: https://www.exfo.com/en/products/fiel...
EXFO Training Services: https://www.exfo.com/en/services/trai...
TIMESTAMPS
0:00 Intro
0:15 Connect the test jumper
0:40 Connect the second jumper to the light source
0:52 Connect the two jumpers together
1:06 Start the light source
1:19 Ready for testing
Learn more about EXFO's PXM/LXM - MPO optical loss test set: https://www.exfo.com/en/products/fiel...
EXFO Training Services: https://www.exfo.com/en/services/trai...
TIMESTAMPS
0:00 Intro
0:15 Connect the test jumper
0:40 Connect the second jumper to the light source
0:52 Connect the two jumpers together
1:06 Start the light source
1:19 Ready for testing
پارسال
در تاریخ 1402/04/21 منتشر شده
است.
183
بـار بازدید شده