The Iron Edge Weightlifting Platform
13 هزار بار بازدید -
12 سال پیش
-
Visit Iron Edge
Visit Iron Edge http://www.ironedge.com
The Iron Edge Weightlifting Platform
The Iron Edge Weightlifting Platform has been designed without compromise. Only the very best materials have been used in its construction and it sets a new benchmark for weightlifting platforms.
There are several key factors that put this platform at the head of the class:
Rubber hardness of 87%. For those not in-the-know, this is exceptionally high. A square metre of this rubber weighs in excess of 60kg and is extremely dense with a flawless finish. As a result the platform will show very little wear and will look new throughout it's life. While this hardness of rubber is typically so dense that it would offer very little absorption to barbells and bumper plates being dropped, the genuious in the rubber is actually found on the underside. Here you will find a revolutionary hole design that has been specifically designed to create 'forgiveness' in the rubber. Ultimately, the platform has best of both worlds; indestructible dense rubber and an underside which creates the cushioning effect that is able to absorb the impact of your bars and bumpers to the greatest extent possible.
Noise reduction. The revolutionary hole design reduces noise and helps absorb the impact of the bumpers.
Powder coated 50mm RHS steel surround fixed in place with sunken allen bolts for a seamless finish.
Flawlessly constructed timber insert. Most platform inserts look aged within their first month as they are made up of a single piece of timber - not this one! 16 layers of structural grade ply are bonded together and cured over several days. The top layer is what takes all the punishment and is therefore disected into several dozen pieces before being individually re-bonded back together to ensure maximum strength - this eradicates splitting, minimises indentations and gives the platform insert its unmistakable parquetry appearance. The insert is then laquered 3 times with textured 'grit' for optimum grip levels.
The manufacturing process for these platforms takes no less than 6 weeks from start to finish - the end result is perfection. The bar has officially been raised.
For More info ... http://www.ironedge.com.au/store/iron...
The Iron Edge Weightlifting Platform
The Iron Edge Weightlifting Platform has been designed without compromise. Only the very best materials have been used in its construction and it sets a new benchmark for weightlifting platforms.
There are several key factors that put this platform at the head of the class:
Rubber hardness of 87%. For those not in-the-know, this is exceptionally high. A square metre of this rubber weighs in excess of 60kg and is extremely dense with a flawless finish. As a result the platform will show very little wear and will look new throughout it's life. While this hardness of rubber is typically so dense that it would offer very little absorption to barbells and bumper plates being dropped, the genuious in the rubber is actually found on the underside. Here you will find a revolutionary hole design that has been specifically designed to create 'forgiveness' in the rubber. Ultimately, the platform has best of both worlds; indestructible dense rubber and an underside which creates the cushioning effect that is able to absorb the impact of your bars and bumpers to the greatest extent possible.
Noise reduction. The revolutionary hole design reduces noise and helps absorb the impact of the bumpers.
Powder coated 50mm RHS steel surround fixed in place with sunken allen bolts for a seamless finish.
Flawlessly constructed timber insert. Most platform inserts look aged within their first month as they are made up of a single piece of timber - not this one! 16 layers of structural grade ply are bonded together and cured over several days. The top layer is what takes all the punishment and is therefore disected into several dozen pieces before being individually re-bonded back together to ensure maximum strength - this eradicates splitting, minimises indentations and gives the platform insert its unmistakable parquetry appearance. The insert is then laquered 3 times with textured 'grit' for optimum grip levels.
The manufacturing process for these platforms takes no less than 6 weeks from start to finish - the end result is perfection. The bar has officially been raised.
For More info ... http://www.ironedge.com.au/store/iron...
12 سال پیش
در تاریخ 1391/12/28 منتشر شده
است.
13,002
بـار بازدید شده