FUSION 360 || KNUCKLE JOINT || MODELLING || ASSEMBLY || ANIMATION
21.5 هزار بار بازدید -
5 سال پیش
-
This video walks you through
This video walks you through the process of modeling the knuckle joint and its assembly in Fusion 360
Download the Drawing: https://drive.google.com/file/d/17SAa...
Timestamp:
00:00 Intro
00:24 Saving the file
00:34 Eye-Component
04:52 Fork End- Component
05:18 Sketch5
11:12 Knuckle Pin- Component
12:35 Collar- Component
14:25 Pin- Component
16:43 Assembling
19:47 Cleaning The Model
10:04 End
Top 10 tips in Fusion 360 that you must know in 2020
FUSION 360 | TOP 10 TIPS THAT YOU SH...
Do you like cars and how they change gears, here's video for you to checkout
FUSION 360 || CONSTANT MESH GEARBOX-1...
Explore ultimate generative Design
GENERATIVE DESIGN PART -1 || FUSION 3...
Dynamic Sculpting 1 Min everyday
1 Min Sculpting | Every Day | Fusion ...
wanna design F1 car heck it out.
FUSION 360 || F1 CAR DESIGN PART 2 ||...
If you are passionate about engines here's a video for you to watch on PISTON design
FUSION 360 || PISTON DESIGN || MODELL...
I think you love cars, if you do so here's a video for you to watch
#autodeskfusion | BMW M3 GTR | FREEFO...
A knuckle joint is used to connect the two rods which are under the tensile load when there is requirement of a small amount of flexibility or when angular movement is necessary. There is always axial or linear line of action of load.
The knuckle joint assembly consists of the following major components:
Single eye.
Double eye or fork
Knuckle pin.
At one end of the rod, a single eye is formed and a double eye is formed at the other end of the rod. Both, single and double eyes are connected by a pin inserted through the eye. The pin has a head at one end and at other end, there is a taper pin or split pin. For gripping purpose, the ends of the rod are of octagonal forms. Now, when the two eyes are pulled apart, the pin holds them together. The solid rod portion of the joint in this case is much stronger than the portion through which the pin passes.
Download the Drawing: https://drive.google.com/file/d/17SAa...
Timestamp:
00:00 Intro
00:24 Saving the file
00:34 Eye-Component
04:52 Fork End- Component
05:18 Sketch5
11:12 Knuckle Pin- Component
12:35 Collar- Component
14:25 Pin- Component
16:43 Assembling
19:47 Cleaning The Model
10:04 End
Top 10 tips in Fusion 360 that you must know in 2020
FUSION 360 | TOP 10 TIPS THAT YOU SH...
Do you like cars and how they change gears, here's video for you to checkout
FUSION 360 || CONSTANT MESH GEARBOX-1...
Explore ultimate generative Design
GENERATIVE DESIGN PART -1 || FUSION 3...
Dynamic Sculpting 1 Min everyday
1 Min Sculpting | Every Day | Fusion ...
wanna design F1 car heck it out.
FUSION 360 || F1 CAR DESIGN PART 2 ||...
If you are passionate about engines here's a video for you to watch on PISTON design
FUSION 360 || PISTON DESIGN || MODELL...
I think you love cars, if you do so here's a video for you to watch
#autodeskfusion | BMW M3 GTR | FREEFO...
A knuckle joint is used to connect the two rods which are under the tensile load when there is requirement of a small amount of flexibility or when angular movement is necessary. There is always axial or linear line of action of load.
The knuckle joint assembly consists of the following major components:
Single eye.
Double eye or fork
Knuckle pin.
At one end of the rod, a single eye is formed and a double eye is formed at the other end of the rod. Both, single and double eyes are connected by a pin inserted through the eye. The pin has a head at one end and at other end, there is a taper pin or split pin. For gripping purpose, the ends of the rod are of octagonal forms. Now, when the two eyes are pulled apart, the pin holds them together. The solid rod portion of the joint in this case is much stronger than the portion through which the pin passes.
5 سال پیش
در تاریخ 1397/12/29 منتشر شده
است.
21,555
بـار بازدید شده