DIY Craft Vinyl Storage Organizer Tower (So Easy!)
67.7 هزار بار بازدید -
5 سال پیش
-
How to make a DIY
How to make a DIY craft vinyl storage organizer tower with inexpensive IKEA pieces (a Kallax unit and Skadis pegboards) at https://jennifermaker.com/craft-vinyl...
Also see the Paper Storage Tower Tutorial at https://jennifermaker.com/12x12-verti...
I appreciate every subscriber. It's free and easy to subscribe -- just click here: http://bit.ly/sub2jennifer
TOOLS & SUPPLIES LIST (contains my affiliate links):
IKEA Kallax storage unit item 002.758.48, one white unit (you can buy this on Amazon at https://amzn.to/31l0KUn if you don’t live near an IKEA) – I bought one new at IKEA for $35
IKEA SKÅDIS 14 1/4″ x 22″ White Pegboards at https://www.ikea.com/us/en/catalog/pr... — I used three on each side for a total of nine pegboards
IKEA SKÅDIS Hooks at https://amzn.to/31NDwqr and https://www.ikea.com/us/en/catalog/pr...
IKEA SKÅDIS Letter Holders at https://amzn.to/2Z5cUzr and https://www.ikea.com/us/en/catalog/pr...
IKEA SKÅDIS Elastic Bands at https://amzn.to/2YW96oZ and https://www.ikea.com/us/en/catalog/pr...
IKEA Rill Caster (set of 4) at https://www.ikea.com/us/en/catalog/pr...
(Optional) Saw (hand saw or electric saw) — we used it to cut three of the pegboards so they fit at the bottom of each side
Screwdriver or drill
(Optional) Piece of 1/4″ or 1/2″ plywood (16 1/2″ wide by 58″ tall)
(Optional) Extra screws (about a dozen or so) – these should be long enough to go through your plywood board + an extra 1/4-1/2″ (we used drywall screws)
(Optional) White paint
#cricut #storage #htv
How to Make the Craft Vinyl Storage Organizer
Step 1: Assemble your Kallax storage unit. We put ours together in about an hour, maybe a little less. It wasn't difficult.
Step 2: Cut a piece of plywood to be 16 1/2" wide by 58" tall. This wood will go on the back of your Kallax storage unit so you can mount pegboards there. Of course, you can skip this step. Turn your Kallax unit over and put the plywood on the back of it. Screw the plywood to the Kallax unit using screws just long enough to go through the plywood and into the unit. We screwed it in at the top, bottom, and middle.
Step 3: It's time to add the pegboards! We followed the directions that came with each of the Skadis pegboards to attach them to the sides of the Kallax unit. You can fit two full pegboards on each side, with room to spare. I wanted my pegboards to go all the way down each side, so we cut three of the pegboards to be 14" high to fit at the bottom of each side. Repeat until you have all three sides covered with pegboards!
Step 4: Now it's time to the casters, if you've chosen to put yours on wheels. You can attach the casters directly to the bottom of your Kallax unit. Once the casters are secured on the bottom of your craft vinyl storage unit, turn it right side up and make sure everything seems stable.
Step 5: Now the fun begins! Use the IKEA SKÅDIS Hooks, Letter Holders, and Elastic Bands in whatever combinations work best for your vinyl collection. We used the hooks on one side, the letter holders on the second side, and the elastic bands on the third side so you could see how well they worked to hold rolls of craft vinyl!
My favorite of the three types of vinyl storage are the Skadis hooks, because they hold more vinyl and are a touch easier to put the vinyl in and out of. Of course, that means it's also a touch easier for the vinyl to get knocked off if you brush it, so keep that in mind if you intend to put your craft vinyl storage unit in a high traffic area.
For the inside the craft vinyl storage unit, you could store even more vinyl. Or you can put your related accessories in there. I chose to put my Cricut EasyPresses in the top two cubbies, my Cricut Infusible Ink collection in the third cubbie, and a box with pressing mats in the fourth cubbie!
I mostly have rolls of vinyl, so I preferred to store my vinyl on the hooks on the sides. But if you also have flat vinyl sheets, I recommend you check out my 12x12 paper storage tower — you can combine the two ideas to make shelves for your flat vinyl sheets on the inside and store your vinyl rolls on the outside.
============
Follow me at:
Blog: https://jennifermaker.com
Facebook Page: Facebook: jennifermakercrafts
Facebook Group: Facebook: cricutcraftersandmakers
Instagram: Instagram: jennifer.maker
Pinterest: Pinterest: jenuinemom
Please subscribe to my channel at jennifermaker for more video tutorials to craft a life you love!
Credits:
Introduction: PixelBytes (my child!)
Music: Cute by Bensound (licensed, royalty and copyright free)
Videography: Jennifer Marx on a Panasonic Lumix FZ-1000 DSLR 4K camera
Design: A Jennifer Maker original!
Also see the Paper Storage Tower Tutorial at https://jennifermaker.com/12x12-verti...
I appreciate every subscriber. It's free and easy to subscribe -- just click here: http://bit.ly/sub2jennifer
TOOLS & SUPPLIES LIST (contains my affiliate links):
IKEA Kallax storage unit item 002.758.48, one white unit (you can buy this on Amazon at https://amzn.to/31l0KUn if you don’t live near an IKEA) – I bought one new at IKEA for $35
IKEA SKÅDIS 14 1/4″ x 22″ White Pegboards at https://www.ikea.com/us/en/catalog/pr... — I used three on each side for a total of nine pegboards
IKEA SKÅDIS Hooks at https://amzn.to/31NDwqr and https://www.ikea.com/us/en/catalog/pr...
IKEA SKÅDIS Letter Holders at https://amzn.to/2Z5cUzr and https://www.ikea.com/us/en/catalog/pr...
IKEA SKÅDIS Elastic Bands at https://amzn.to/2YW96oZ and https://www.ikea.com/us/en/catalog/pr...
IKEA Rill Caster (set of 4) at https://www.ikea.com/us/en/catalog/pr...
(Optional) Saw (hand saw or electric saw) — we used it to cut three of the pegboards so they fit at the bottom of each side
Screwdriver or drill
(Optional) Piece of 1/4″ or 1/2″ plywood (16 1/2″ wide by 58″ tall)
(Optional) Extra screws (about a dozen or so) – these should be long enough to go through your plywood board + an extra 1/4-1/2″ (we used drywall screws)
(Optional) White paint
#cricut #storage #htv
How to Make the Craft Vinyl Storage Organizer
Step 1: Assemble your Kallax storage unit. We put ours together in about an hour, maybe a little less. It wasn't difficult.
Step 2: Cut a piece of plywood to be 16 1/2" wide by 58" tall. This wood will go on the back of your Kallax storage unit so you can mount pegboards there. Of course, you can skip this step. Turn your Kallax unit over and put the plywood on the back of it. Screw the plywood to the Kallax unit using screws just long enough to go through the plywood and into the unit. We screwed it in at the top, bottom, and middle.
Step 3: It's time to add the pegboards! We followed the directions that came with each of the Skadis pegboards to attach them to the sides of the Kallax unit. You can fit two full pegboards on each side, with room to spare. I wanted my pegboards to go all the way down each side, so we cut three of the pegboards to be 14" high to fit at the bottom of each side. Repeat until you have all three sides covered with pegboards!
Step 4: Now it's time to the casters, if you've chosen to put yours on wheels. You can attach the casters directly to the bottom of your Kallax unit. Once the casters are secured on the bottom of your craft vinyl storage unit, turn it right side up and make sure everything seems stable.
Step 5: Now the fun begins! Use the IKEA SKÅDIS Hooks, Letter Holders, and Elastic Bands in whatever combinations work best for your vinyl collection. We used the hooks on one side, the letter holders on the second side, and the elastic bands on the third side so you could see how well they worked to hold rolls of craft vinyl!
My favorite of the three types of vinyl storage are the Skadis hooks, because they hold more vinyl and are a touch easier to put the vinyl in and out of. Of course, that means it's also a touch easier for the vinyl to get knocked off if you brush it, so keep that in mind if you intend to put your craft vinyl storage unit in a high traffic area.
For the inside the craft vinyl storage unit, you could store even more vinyl. Or you can put your related accessories in there. I chose to put my Cricut EasyPresses in the top two cubbies, my Cricut Infusible Ink collection in the third cubbie, and a box with pressing mats in the fourth cubbie!
I mostly have rolls of vinyl, so I preferred to store my vinyl on the hooks on the sides. But if you also have flat vinyl sheets, I recommend you check out my 12x12 paper storage tower — you can combine the two ideas to make shelves for your flat vinyl sheets on the inside and store your vinyl rolls on the outside.
============
Follow me at:
Blog: https://jennifermaker.com
Facebook Page: Facebook: jennifermakercrafts
Facebook Group: Facebook: cricutcraftersandmakers
Instagram: Instagram: jennifer.maker
Pinterest: Pinterest: jenuinemom
Please subscribe to my channel at jennifermaker for more video tutorials to craft a life you love!
Credits:
Introduction: PixelBytes (my child!)
Music: Cute by Bensound (licensed, royalty and copyright free)
Videography: Jennifer Marx on a Panasonic Lumix FZ-1000 DSLR 4K camera
Design: A Jennifer Maker original!
5 سال پیش
در تاریخ 1398/05/25 منتشر شده
است.
67,721
بـار بازدید شده