Ford ignition coil (waste spark) testing with a multimeter. Mustang, Windstar, Freestar 3.8 / 3.9 V6
8.2 هزار بار بازدید -
2 سال پیش
-
Ford waste spark ignition coil
Ford waste spark ignition coil testing
Resistance for DG-532 Motorcraft coil
Same with OE replace coils
0.3-1.0 ohms - primary winding
6.5-11.5 Kohms - secondary winding
Always check for cracks, corrosion, and it's best to check ignition coils still on the vehicle fully warmed because heat soak can cause a higher resistance reading. This can cause a weak spark output and cause misfires and lean fuel trims.
Thanks for watching. Don't forget to like and subscribe. I am NOT liable for any damages, injury's, third party injury's, or death. This is video is for educational purposes only, I am in no way telling you to do this at home. This video shall not be reproduced without my consent
Resistance for DG-532 Motorcraft coil
Same with OE replace coils
0.3-1.0 ohms - primary winding
6.5-11.5 Kohms - secondary winding
Always check for cracks, corrosion, and it's best to check ignition coils still on the vehicle fully warmed because heat soak can cause a higher resistance reading. This can cause a weak spark output and cause misfires and lean fuel trims.
Thanks for watching. Don't forget to like and subscribe. I am NOT liable for any damages, injury's, third party injury's, or death. This is video is for educational purposes only, I am in no way telling you to do this at home. This video shall not be reproduced without my consent
2 سال پیش
در تاریخ 1400/12/22 منتشر شده
است.
8,255
بـار بازدید شده