Adjustable Auto On Off delay timer circuit on Breadboard | 555 Timer project #4
102.8 هزار بار بازدید -
5 سال پیش
-
A tutorial on how to
A tutorial on how to build an adjustable auto power On Off delay timer circuit using 555 timer in Monostable mode. This electronic timer circuit is helpful when you need to power On/Off any AC Appliances after a pre-defined duration. For example you can use this circuit to automatically turn Off a mobile charger, after let's say 1 hour, to prevent overcharging the battery.
The timer delay can be fixed to time periods like 1, 5, 10 minutes etc. (or for any duration ranging from a few seconds to hours). For controlling AC appliances, a relay needs to be added at the output of 555 timer IC (As explained in the video tutorial)
For more information & link to the circuit diagram, visit this project page: https://elonics.org/adjustable-auto-o...
Below is the list of components required for building the electronic delay timer circuit:
* 555 IC
* Momentary Push Button Switch
* LED / any output device
* Capacitor - 470uF
* Resistors - 68K, 10K, 220R
* Breadboard
* Breadboard Connectors
* Power Supply (5-12)V
* Potentiometer (Optional)
* Relay Module (Optional)
* Refer to the LED resistor table shown in the video tutorial for the exact value of LED's series resistor (220R)
This tutorial is a part of 18 video series on 555 IC Projects: 555 Timer Projects on Breadboard With...
-----------------------------------------------------------------------
For more electronics projects, visit: https://elonics.org/
Like our Facebook page: https://fb.me/elonics/
And don't forget to Subscribe!
The timer delay can be fixed to time periods like 1, 5, 10 minutes etc. (or for any duration ranging from a few seconds to hours). For controlling AC appliances, a relay needs to be added at the output of 555 timer IC (As explained in the video tutorial)
For more information & link to the circuit diagram, visit this project page: https://elonics.org/adjustable-auto-o...
Below is the list of components required for building the electronic delay timer circuit:
* 555 IC
* Momentary Push Button Switch
* LED / any output device
* Capacitor - 470uF
* Resistors - 68K, 10K, 220R
* Breadboard
* Breadboard Connectors
* Power Supply (5-12)V
* Potentiometer (Optional)
* Relay Module (Optional)
* Refer to the LED resistor table shown in the video tutorial for the exact value of LED's series resistor (220R)
This tutorial is a part of 18 video series on 555 IC Projects: 555 Timer Projects on Breadboard With...
-----------------------------------------------------------------------
For more electronics projects, visit: https://elonics.org/
Like our Facebook page: https://fb.me/elonics/
And don't forget to Subscribe!
5 سال پیش
در تاریخ 1398/10/19 منتشر شده
است.
102,850
بـار بازدید شده