Computer beeps and won't turn on Fix
1 میلیون بار بازدید -
11 سال پیش
-
Computer beeps and won't turn
Computer beeps and won't turn on Fix. PC beeps continuously and won't turn on and show any image on screen. Desktop beeping fix. Desktop won't turn on, fans spin but no image on screen.
Donations
● Cashapp - $ProCo1
Beep error Code Meaning for Different Bios's:
http://www.computerhope.com/beep.htm
Beep codes are used by the BIOS during the POST to report certain initial system errors.
If you're hearing beep codes after you turn your computer on, it typically means that the system has encountered some kind of problem before it was able to display any kind of error information on the monitor.
Steps in the Video:
Step 1:
Shut down your PC
Step 2:
unplug your power cord
Step 3:
Remove your side panel Screws
Step 4:
Remove the side panel itself
Step 5:
Locate your Pc memory slots
step 6:
pick one of your memory, Pull the memory latch back gently on both ends of the memory slot to release it
Step 7:
Remove the memory
Step 8:
Test your PC by plugging in the power & Vga cable, and turning it on to listen for if the continuous beep continues or if a image appears on screen
Twitter- Twitter: ProCoPCRepairs
Facebook- Facebook: proco.computerrepairs
Google+ https://plus.google.com/1160037449472...
Music By:
"FreeRun" by dan Thomas
http://creativecommons.org/licenses/b...
http://sampleswap.org/mp3/creative-co...
Donations
● Cashapp - $ProCo1
Beep error Code Meaning for Different Bios's:
http://www.computerhope.com/beep.htm
Beep codes are used by the BIOS during the POST to report certain initial system errors.
If you're hearing beep codes after you turn your computer on, it typically means that the system has encountered some kind of problem before it was able to display any kind of error information on the monitor.
Steps in the Video:
Step 1:
Shut down your PC
Step 2:
unplug your power cord
Step 3:
Remove your side panel Screws
Step 4:
Remove the side panel itself
Step 5:
Locate your Pc memory slots
step 6:
pick one of your memory, Pull the memory latch back gently on both ends of the memory slot to release it
Step 7:
Remove the memory
Step 8:
Test your PC by plugging in the power & Vga cable, and turning it on to listen for if the continuous beep continues or if a image appears on screen
Twitter- Twitter: ProCoPCRepairs
Facebook- Facebook: proco.computerrepairs
Google+ https://plus.google.com/1160037449472...
Music By:
"FreeRun" by dan Thomas
http://creativecommons.org/licenses/b...
http://sampleswap.org/mp3/creative-co...
11 سال پیش
در تاریخ 1392/06/18 منتشر شده
است.
1,066,878
بـار بازدید شده