2015 - 2016 GMC Yukon - How To Program A Smart Key Remote Fob - Add A Key DIY Tutorial

A step by step video on how to program a smart key remote fob to a 2015 - 2016 GMC Yukon.

More free DIY programming instructions available at https://www.ProgramYourRemote.com

*This will only apply to 2015 and 2016 GMC Yukon's that have push button start ignitions.

A new smart key remote fob can be programmed to the vehicle when there is one programmed remote. To program, the vehicle must be off and all remotes, both currently programmed and new, must be with you.

1. Remove the key from the key from the programmed remote.

2. Place the programmed remote in the cupholder or passenger seat.

3. Insert the vehicle key into the key lock cylinder on the driver door handle. Then turn the key counterclockwise, to the unlock position, five times within 10 seconds. The Driver Information Center (DIC) displays READY FOR REMOTE #2, 3, 4, ETC.

4. Place the new remote in the remote pocket/insert. Open the center console storage area and the storage tray. The remote pocket/insert is in front of the storage area next to the center console storage area between the driver and front passenger seats.

5. Press the ENGINE START/STOP button. When the remote is learned, the DIC display will show that it is ready to program the next remote.

6. Remove the remote from the remote pocket and press unlock or lock on the remote. To program additional remotes, repeat Steps 4–6. When all additional remotes are programmed, press and hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.

7. Return the key back into the remote.

This how-to video tutorial can be used to program the smart key remote fob on the following GMC models:
2015 GMC Yukon ( SLE, SLT and Denali )
2016 GMC Yukon ( SLE, SLT and Denali )

Find a Locksmith in your area with https://www.LocateALocksmith.com