Definitive Guide to Mounting Your Vortex Rotary Axis and First Moves

With assembly out of the way, it is time we mount the Vortex to the LongMill and take it out for a spin! In this video, we will cover how to set up your machine for maximum compatibility, create the mounting holes needed to secure the Vortex, and switch over to rotary mode for the first time! Sit tight as your Vortex will start spinning by the end of this video!


Chapters

0:00 Introduction to Table Mounting
1:09 Machine Preparation
2:16 Note on gSender
2:40 Track Placement & Interference Check
3:27 Default Mounting
8:02 Alternative Mounting
13:48 Rotary Mode & First Moves
17:35 Outro

gSender Edge V1.3.3 Download: https://github.com/Sienci-Labs/gsende...

For written instructions, visit our Vortex unboxing/assembly page: https://resources.sienci.com/view/vx-...

Order your Vortex Rotary Axis here:
https://sienci.com/product/vortex-rot...

We're here to assist you every step of the way during your Vortex assembly. Should you encounter any specific challenges, please don't hesitate to share them with us. Your feedback is invaluable as we continually strive to enhance the assembly process and ensure your experience is nothing short of exceptional.


▸RESOURCES

JOIN US
▸ Sienci Community | https://forum.sienci.com/  
▸ Facebook Group | Facebook: mill.one  
▸ Instagram | Instagram: siencilabs

Hashtags:
#siencilabs #longmill #vortex #vortexrotaryaxis #rotaryaxis #cnc #milling #track #assembly #guide

• #science_technology
• #siencilabs
• #longmill
• #vortex
• #vortexrotaryaxis
• #rotaryaxis
• #cnc
• #milling
• #track
• #assembly
• #guide