How to. Hand made sign using a router, simple technique.
200.7 هزار بار بازدید -
3 سال پیش
-
Here is the technique I
Here is the technique I use to get great results when free handing my router for writing. Any questions, drop them in the comments below.
** I didn’t mention in the video, I used a 12mm/ 1/2” V groove bit in my 1/4” palm router. This is simply because that’s what I have. I bought a box of bits when I bought my router and I tried different bits and like the effect with the V groove one. I also set the depth to about 3mm/ 1/8” this makes a shallow profile which means you must be careful when sanding your piece after. If you are not careful you can easily sand that flat!***
Head to my Facebook page or Instagram to see more of what I do.
Don’t forget to like and subscribe...
Facebook: Bespoketimberstructure
https://www.instagram.com/p/CKL-LtVA6...
#woodworking
#router
#carpentry
#DIY
#signs
#how to
#woodworking
** I didn’t mention in the video, I used a 12mm/ 1/2” V groove bit in my 1/4” palm router. This is simply because that’s what I have. I bought a box of bits when I bought my router and I tried different bits and like the effect with the V groove one. I also set the depth to about 3mm/ 1/8” this makes a shallow profile which means you must be careful when sanding your piece after. If you are not careful you can easily sand that flat!***
Head to my Facebook page or Instagram to see more of what I do.
Don’t forget to like and subscribe...
Facebook: Bespoketimberstructure
https://www.instagram.com/p/CKL-LtVA6...
#woodworking
#router
#carpentry
#DIY
#signs
#how to
#woodworking
3 سال پیش
در تاریخ 1399/11/10 منتشر شده
است.
200,776
بـار بازدید شده