Bernette 334D Serger / Overlocker - Detailed Threading Tutorial
2.7 هزار بار بازدید -
4 ماه پیش
-
A detailed video on threading
A detailed video on threading the Bernette 334D serger / overlocker and some tips and tricks.
Threading is done with a pair of tweezers only as the threaders that come with the machine are often missing. I use colored thread to match the threading diagram to make it clear as to what looper and needle is being threaded.
This model has a handy threading diagram in behind the front door.
Please consider supporting the channel at Patreon - Patreon: sewingmachines
Web Site - http://www.institches.co.nz
Index / Chapter list:
0:00 - Introduction
0:33 - Setting up the thread stand and mast
2:34 - Turn off the machine for safety
2:57 - Opening the covers
3:35 - Installing the thread on the stand
4:39 - Threading the mast
5:36 - Upper looper threading (blue)
16:45 - Lower looper threading (red)
24:17 - Needle threading (green/yellow)
28:12 - Chaining off and testing
29:15 - Conclusion and thanks
Threading is done with a pair of tweezers only as the threaders that come with the machine are often missing. I use colored thread to match the threading diagram to make it clear as to what looper and needle is being threaded.
This model has a handy threading diagram in behind the front door.
Please consider supporting the channel at Patreon - Patreon: sewingmachines
Web Site - http://www.institches.co.nz
Index / Chapter list:
0:00 - Introduction
0:33 - Setting up the thread stand and mast
2:34 - Turn off the machine for safety
2:57 - Opening the covers
3:35 - Installing the thread on the stand
4:39 - Threading the mast
5:36 - Upper looper threading (blue)
16:45 - Lower looper threading (red)
24:17 - Needle threading (green/yellow)
28:12 - Chaining off and testing
29:15 - Conclusion and thanks
4 ماه پیش
در تاریخ 1403/01/28 منتشر شده
است.
2,784
بـار بازدید شده