1997-2003 F250 F350 7.3L CPS F7TZ-12K073-B Change
107.7 هزار بار بازدید -
9 سال پیش
-
Description: 1997-2003 F250 F350 7.3L
Description: 1997-2003 F250 F350 7.3L CPS Sensor F7TZ-12K073-B Change
My 2001 F350 7.3L stumbles sometimes when i'm going down the freeway, it's not the first time it's done this so I knew what it was.
The 7.3 International CPS sensor goes bad sometimes, it either Fails or goes Intermittent. The OEM Ford 7.3L Diesel Camshaft Position Sensor (CPS) F7TZ-12K073-B should fit 1997-2003 Ford F250/350/450/550 7.3L Diesels.
1. If it fails, its very obvious, the engine just won't run and when replaced the engine runs. There are other things that cause the engine not to run, this is just one of them. Here's some other issues that may cause it.
2. If it's Intermittent the engine will have a subtle stumble or cut in and out.
3. There are three other sensors that commonly cause the engine to stumble or fail to start as well, they are the:
- APPS/AGPS Accelerator/Gas Pedal Position Sensor (gas peddle assembly). Dorman 42229PY ~ $87.96
- ICP Injection Control Pressure Sensor.
- EBP Exhaust Back Pressure Sensor.
4. The easiest way to diagnose it, if you don't have computer software, is to change it. If that's not the problem then you have a spare sensor to put behind the seat of your truck so when it goes bad you'll have one, and one of them will go out, guaranteed.
Part Used in this video:
- Ford CPS OEM P/N: F7TZ-12K073-B about: $27.00 off eBay.
The aftermarket ones cost about: $13.00 off eBay. I recommend using the Ford Part Number.
Tools Used:
- 10 mm 3/8" Drive Socket.
- 3" 3/8" Drive Extension.
- 6" 3/8" Stubby Ratchet.
- 1/2" to 3/8" Adapter, to break it loose, not shown in video.
- 1/2" Drive Ratchet, to break it loose, not shown in video.
- Shop Rag, to break it loose, not shown in video.
Chemicals Used:
- None this video.
If this helped please give me a Thumbs up.
Subscribe if you would like to help my channel.
Thanks for watching. Best Wishes n Blessings. Keith
My 2001 F350 7.3L stumbles sometimes when i'm going down the freeway, it's not the first time it's done this so I knew what it was.
The 7.3 International CPS sensor goes bad sometimes, it either Fails or goes Intermittent. The OEM Ford 7.3L Diesel Camshaft Position Sensor (CPS) F7TZ-12K073-B should fit 1997-2003 Ford F250/350/450/550 7.3L Diesels.
1. If it fails, its very obvious, the engine just won't run and when replaced the engine runs. There are other things that cause the engine not to run, this is just one of them. Here's some other issues that may cause it.
2. If it's Intermittent the engine will have a subtle stumble or cut in and out.
3. There are three other sensors that commonly cause the engine to stumble or fail to start as well, they are the:
- APPS/AGPS Accelerator/Gas Pedal Position Sensor (gas peddle assembly). Dorman 42229PY ~ $87.96
- ICP Injection Control Pressure Sensor.
- EBP Exhaust Back Pressure Sensor.
4. The easiest way to diagnose it, if you don't have computer software, is to change it. If that's not the problem then you have a spare sensor to put behind the seat of your truck so when it goes bad you'll have one, and one of them will go out, guaranteed.
Part Used in this video:
- Ford CPS OEM P/N: F7TZ-12K073-B about: $27.00 off eBay.
The aftermarket ones cost about: $13.00 off eBay. I recommend using the Ford Part Number.
Tools Used:
- 10 mm 3/8" Drive Socket.
- 3" 3/8" Drive Extension.
- 6" 3/8" Stubby Ratchet.
- 1/2" to 3/8" Adapter, to break it loose, not shown in video.
- 1/2" Drive Ratchet, to break it loose, not shown in video.
- Shop Rag, to break it loose, not shown in video.
Chemicals Used:
- None this video.
If this helped please give me a Thumbs up.
Subscribe if you would like to help my channel.
Thanks for watching. Best Wishes n Blessings. Keith
9 سال پیش
در تاریخ 1394/07/25 منتشر شده
است.
107,772
بـار بازدید شده