Three Easy Ways to Drape Mold Clay Slabs with an Added Footring
166.2 هزار بار بازدید -
5 سال پیش
-
This video demonstrates how to
This video demonstrates how to make three variations of a simple drape molded forms using clay slabs. I create a footring for all three of the pieces. I am using a slab without texture in this video- but of course, you can make withtexture. My ceramics II students have a textured slab set project for which this technique really lends itself.
The clay slabs are rolled off camera. I ribbed each slab, then draped over the molds. I used a needle tool to cut UNDER the edge of the mold, being careful NOT to scratch the mold surface. That can ruin a mold. I cut the strips for the footrings, and scored, slipped, and compressed them on. When the forms are leatherhard, I then take them off the molds, and work on cleaning the rims. I use a combination of shredders/surforms, notched ribs, and ribs, then eventually compress the rim with wet fingers. Lastly, I show how I made two handles on the oval form- by using a flattened coil, and I textured it with a light towel between the clay and the texturing tool, and shaped the handles. In the case of these, I could leave the handles separate and glaze them individually then fuse together in the kiln, or just slip and score them on for attachment
The OVAL mold is a GR Pottery forms mold https://grpotteryforms.com/
I created a foot maker- which was a little piece of wood with two sharpened nails as I show in the video to cut the foot.
The ROUND wooden mold is from Bamboo Tools http://www.bambootools.com/moulds/Mou...
The Plaster mold I made in a previous video Making Plaster Hump Molds for Drape M...
For some other slab videos which go over the rolling process, check out some of these video links:
Slab cylinder bowl: Textured Slab Bowls From a Rounded Cy...
Slab cylinder cups: Three Variations on Making a Simple C...
Tripod Cylinder cups: How to make a Tripod Textured Slab Cu...
Cylinder cup with squared bottom: Creating a Round Slab Cup with a Dart...
For the video on me making the plaster mold check this link: Making Plaster Hump Molds for Drape M...
For a video on how I made the notched rib, check out this link: Creating a Notched Rib from a Plastic...
Check out my Amazon Influencer Store where I have recommendations for some of my favorite tools and products many of which I use in my videos- which are available on Amazon. https://www.amazon.com/shop/karanspot...
For the great tools I used in the video check out this link to a live Googledoc I continually update with lots of my favorite tools on Amazon using my associate links! (also some non-amazon suggestions on here!)
https://docs.google.com/document/d/1X...
In this video, I am using standard 153, a nice midrange firing stoneware.
I am a public high school ceramics teacher at William Mason High School in Mason, Ohio. (Mason is currently the largest high school in Ohio!) As a potter, I have been working in clay for over 30 years, and I have been teaching for over 28 years, the past 20 have been specifically teaching high school ceramics. I love what I do! I have my own studio in my home basement, where I work on my personal pottery for my Etsy site; https://www.etsy.com/shop/KaransPotsA...
I started my Youtube channel a few years ago, to make videos to help my students if they are absent and miss a demo, or if they would like to explore more advanced techniques independently. I have been amazed to reach such a wider audience than my own students!
Please subscribe to my channel if you would like to receive channel updates, or would like to learn more about clay and studio processes!
The clay slabs are rolled off camera. I ribbed each slab, then draped over the molds. I used a needle tool to cut UNDER the edge of the mold, being careful NOT to scratch the mold surface. That can ruin a mold. I cut the strips for the footrings, and scored, slipped, and compressed them on. When the forms are leatherhard, I then take them off the molds, and work on cleaning the rims. I use a combination of shredders/surforms, notched ribs, and ribs, then eventually compress the rim with wet fingers. Lastly, I show how I made two handles on the oval form- by using a flattened coil, and I textured it with a light towel between the clay and the texturing tool, and shaped the handles. In the case of these, I could leave the handles separate and glaze them individually then fuse together in the kiln, or just slip and score them on for attachment
The OVAL mold is a GR Pottery forms mold https://grpotteryforms.com/
I created a foot maker- which was a little piece of wood with two sharpened nails as I show in the video to cut the foot.
The ROUND wooden mold is from Bamboo Tools http://www.bambootools.com/moulds/Mou...
The Plaster mold I made in a previous video Making Plaster Hump Molds for Drape M...
For some other slab videos which go over the rolling process, check out some of these video links:
Slab cylinder bowl: Textured Slab Bowls From a Rounded Cy...
Slab cylinder cups: Three Variations on Making a Simple C...
Tripod Cylinder cups: How to make a Tripod Textured Slab Cu...
Cylinder cup with squared bottom: Creating a Round Slab Cup with a Dart...
For the video on me making the plaster mold check this link: Making Plaster Hump Molds for Drape M...
For a video on how I made the notched rib, check out this link: Creating a Notched Rib from a Plastic...
Check out my Amazon Influencer Store where I have recommendations for some of my favorite tools and products many of which I use in my videos- which are available on Amazon. https://www.amazon.com/shop/karanspot...
For the great tools I used in the video check out this link to a live Googledoc I continually update with lots of my favorite tools on Amazon using my associate links! (also some non-amazon suggestions on here!)
https://docs.google.com/document/d/1X...
In this video, I am using standard 153, a nice midrange firing stoneware.
I am a public high school ceramics teacher at William Mason High School in Mason, Ohio. (Mason is currently the largest high school in Ohio!) As a potter, I have been working in clay for over 30 years, and I have been teaching for over 28 years, the past 20 have been specifically teaching high school ceramics. I love what I do! I have my own studio in my home basement, where I work on my personal pottery for my Etsy site; https://www.etsy.com/shop/KaransPotsA...
I started my Youtube channel a few years ago, to make videos to help my students if they are absent and miss a demo, or if they would like to explore more advanced techniques independently. I have been amazed to reach such a wider audience than my own students!
Please subscribe to my channel if you would like to receive channel updates, or would like to learn more about clay and studio processes!
5 سال پیش
در تاریخ 1398/07/18 منتشر شده
است.
166,267
بـار بازدید شده