More Printable Upgrades for your Neptune Printer (Part 2)
27.4 هزار بار بازدید -
9 ماه پیش
-
Thats Part 2 of the
Thats Part 2 of the series where i show modifications and upgrades on my Elegoo Neptune 4 Pro. This time they need some additional Parts, like screws, rods, T-Nuts etc. Most of the parts should also fit the Neptune 4 Plus and 4 Max (not the sabilizers in this video, but the webcam and many others from part 1), as well as for the Neptune 3 series printer.
please like and subscribe if this video was usefull for you, it means a lot to me.
This videos sponsor is PCBway and you can get 5$ off your first order if you use this Link:
https://pcbway.com/g/cKBcmd (sorry, i said 5% in the video, only realiced after publishing)
They are professionals in the manufacture of a wide variety of parts. So you can make your own parts (like the Multiboard) without having to own the necessary machine.
Printer im using:
Elegoo Neptune 4 Pro - and you can find it here
USA-Shop:
https://shareasale.com/r.cfm?b=249045...
Europa-Shop:
https://shareasale.com/r.cfm?b=249046...
Canada-Shop:
https://shareasale.com/r.cfm?b=254539...
Australia-Shop:
https://shareasale.com/r.cfm?b=254539...
Elegoo Neptune 4 Pro, on that (affiliate) link you can get it for 279$ (OP is 330$) at the moment, but that may change over time
-------------------------------------------------------------------------------------------------------
Patreon Links:
-------------------------------------------------------------------------------------------------------
if you want to support me, here is my patreon link: patreon.com/user?u=114885466
thank you very much :-)
-------------------------------------------------------------------------------------------------------
The Upgrades video Part 1 is here:
Best Printable Upgrades for your Nept...
Mods and Upgrades for the Elegoo Neptune (3) / 4 / Pro printer i found on thingyverse and printables.com
Here are all the Links to the Parts i used in this video:
https://www.printables.com/de/model/6... - z-axis stabilizer v2 by EntasDisk
https://www.thingiverse.com/thing:519... - Camera mount base by antarias
https://www.thingiverse.com/thing:301... - Extendable Links by giacomo30196
(Set it to 95% size in slicer for the last piece to attache directly to the webcam shown in the video)
Additional parts required for the modifications shown:
Webcam Aliexpress 1080p:
https://a.aliexpress.com/_mOi4MXa
2020 M4 T-slot nuts:
https://a.aliexpress.com/_mMUWmF2
M4 screws:
i used Flat head screws with a length of 10mm and 16mm
M8 nuts:
from your local hardware store, you need 12 for the 3 stabilizers shown in this video, if you build it with 4 stabilizers, you will need 16, if you only build it with 2 - you will need 8...
2 x 100cm M8 threaded rods:
from your local hardware store, you can even use M10 rods for more stability, the stl-Files for the fitting M10-Prints are also here:
https://www.printables.com/de/model/6...
please like and subscribe if this video was usefull for you, it means a lot to me.
This videos sponsor is PCBway and you can get 5$ off your first order if you use this Link:
https://pcbway.com/g/cKBcmd (sorry, i said 5% in the video, only realiced after publishing)
They are professionals in the manufacture of a wide variety of parts. So you can make your own parts (like the Multiboard) without having to own the necessary machine.
Printer im using:
Elegoo Neptune 4 Pro - and you can find it here
USA-Shop:
https://shareasale.com/r.cfm?b=249045...
Europa-Shop:
https://shareasale.com/r.cfm?b=249046...
Canada-Shop:
https://shareasale.com/r.cfm?b=254539...
Australia-Shop:
https://shareasale.com/r.cfm?b=254539...
Elegoo Neptune 4 Pro, on that (affiliate) link you can get it for 279$ (OP is 330$) at the moment, but that may change over time
-------------------------------------------------------------------------------------------------------
Patreon Links:
-------------------------------------------------------------------------------------------------------
if you want to support me, here is my patreon link: patreon.com/user?u=114885466
thank you very much :-)
-------------------------------------------------------------------------------------------------------
The Upgrades video Part 1 is here:
Best Printable Upgrades for your Nept...
Mods and Upgrades for the Elegoo Neptune (3) / 4 / Pro printer i found on thingyverse and printables.com
Here are all the Links to the Parts i used in this video:
https://www.printables.com/de/model/6... - z-axis stabilizer v2 by EntasDisk
https://www.thingiverse.com/thing:519... - Camera mount base by antarias
https://www.thingiverse.com/thing:301... - Extendable Links by giacomo30196
(Set it to 95% size in slicer for the last piece to attache directly to the webcam shown in the video)
Additional parts required for the modifications shown:
Webcam Aliexpress 1080p:
https://a.aliexpress.com/_mOi4MXa
2020 M4 T-slot nuts:
https://a.aliexpress.com/_mMUWmF2
M4 screws:
i used Flat head screws with a length of 10mm and 16mm
M8 nuts:
from your local hardware store, you need 12 for the 3 stabilizers shown in this video, if you build it with 4 stabilizers, you will need 16, if you only build it with 2 - you will need 8...
2 x 100cm M8 threaded rods:
from your local hardware store, you can even use M10 rods for more stability, the stl-Files for the fitting M10-Prints are also here:
https://www.printables.com/de/model/6...
9 ماه پیش
در تاریخ 1402/09/13 منتشر شده
است.
27,435
بـار بازدید شده