raspberry on a boat #2: Kplex as AIS NMEA wireless access point

raspberry4sailing
raspberry4sailing
11.3 هزار بار بازدید - 4 سال پیش - Sailboats are expensive. If you
Sailboats are expensive. If you own an older boat, it is mainly the accessories.
The Raspberry Pi mini computer is cheap and powerful. With some extra hardware, it can take over several tasks on a boat, like acting as a wireless access point, providing the plotter charts and software, collecting AIS information or multiplexing NMEA 0183 data.

My main goal is to build a cheap AIS access point as I am using my tablet as the main plotter but I want to get AIS data in, wirelessly.
But as I did start with it, I also investigated OpenPlotter, OpenCPN and other software packages.

So, I decided to share the outcome as there is not much available on YoutTube so far and it was sometimes tricky to find the necessary information.

This is part #2: Kplex as a wireless AIS NMEA access point

In this part we will prepare a Rasbian Buster image, configure our dAISy HAT PCB, install Kplex, configure Kplex to collect serial data from data and forward it via TCP to our tablet which is using NV Charts.

Let's go!
4 سال پیش در تاریخ 1399/09/02 منتشر شده است.
11,331 بـار بازدید شده
... بیشتر