How To Install 7in Jeep Lights On A Hummer H3

Hey what’s going on everyone! Today I am going to show you how you can install 7in Round Headlights on your Hummer H3 for around $200 to $250. Now I know this is a long video, but many parts can be skippable. Refer to the timestamps down below. The reason why this video is so long is that I designed this video from the perspective of somebody who is brand new to the H3 and doesn’t have much wrenching experience, so if you are more experienced you can definitely skip over some parts to get into the core of the video. Also there is a couple different ways to do things depending on your situation and what you want to do for your install.

Here Are All The Timestamps For The Video:

0:00 - Intro
1:55  - An Overview OF The 7” Lights
4:30  - The 7in Headlight Adapters
8:23 - Grille Guard Removal
11:23 - Grille Removal
14:07 - Headlight Housing Removal
16:30 - Removing The Entire Headlight assembly - (Method 2)
19:18 - Powering The Headlights (Low & High Beam Functions)
21:15 - Wiring Harness Option #1 - Relay Kit
33:49 - Wiring harness option #2 - Polarity Converter Box
37:36 - Quick Info About How To Wire Up The Turn Signal and DRL Functions
38:10 - Reinstalling The Headlight assembly For Those Who Did Method 2
39:36 - Mounting The New 7in Headlights To The Headlight Assembly
43:28 - Adjusting The New 7in Headlights
44:54 - Final Results - Stock vs New 7in Lights
48:43 - Final Thoughts/Wrap Up

Lased Designs Hummer H3 Adapters:
https://laseddesigns.com/collections/...

Regular 7in Headlights Featured In This Video:
https://www.amazon.com/Approved-Headl...

7in Headlights With Turn Signals and DRL Featured In This Video:
https://www.amazon.com/Wrangler-Headl...

Harness Option #1 Relay Kit:
https://www.amazon.com/Negative-Switc...

Harness Option #2 - Polarity Converter Boxes:
https://www.amazon.com/BiuZi-Negative...

DRL Plug and Play Harness:
https://www.amazon.com/Harness-Headli...

New LED Turn Signal Bulbs:
https://www.amazon.com/Alla-Lighting-...

18-Gauge Wire:
https://www.amazon.com/Southwire-5566...

T Tap Electrical Connectors:
https://www.amazon.com/QTEATAK-Electr...

Update:
Hey everyone just a quick update! Since this video's release there has been a small change to the Lased Design's 7in Adapters. Basically, the little studs that connect to the main part of the adapter have received a V2 update. Instead of putting your little studs directly on the ball heads of the factory headlight assembly, you now reuse those little specialized clips that are the OEM headlights and screw them onto the studs. If you have recently ordered a set of adapters, you will notice that the studs on the kit have small holes instead of large holes. Please do not try and bore a much larger hole like you see me doing in the video. If you have the V1 version, you can upgrade to the V2 version, but it honestly doesn't make that much of a difference. If you are not quite sure what I am talking about check out this photo of what the new V2 studs look like: https://laseddesigns.com/collections/...

Wire Stripper:
https://www.amazon.com/Stripper-Autom...

Light Tester:
https://www.amazon.com/Voltage-Contin...


Songs Used In This Video:

“Lonely Nights” - Silent Partner Lonely Nights – Silent Partner (No Co...
“Mob Battle” by Silent Partner

Instagram:
Instagram: acer4lo

My Build Thread:
https://www.hummer4x4offroad.com/foru...

• #autos_vehicles
• #hummer_h3
• #jeep
• #7in_headlights
• #hummer_h3_mods