TP-Link Archer C20 Setup and Full Configuration
74 هزار بار بازدید -
2 سال پیش
-
TP-Link Archer C20 Setup Step
TP-Link Archer C20 Setup Step by Step Tutorial. TP-Link Archer C20 AC750 Dual Band Router Setup and Full Configuration.
TP-Link Router Setup Archer C20 AC750 Wireless Dual Band Router. TP-Link Archer C20 Configuration Easy Method. How to Setup your TP-Link Archer C20 Wireless Router Step by Step Tutorial. If you want to Setup your tp-link archer c20 wifi router, this video is for you.
**How to Setup TP-Link Archer C20**
01. Connect the Ethernet cable from your internet service provider to the "WAN" or "Internet" port on the back of the tp-link archer c20 router.
02. Connect one end of the included power adapter to the device and plug the other end into a wall outlet nearby. Then power on your TP-Link Archer C20 router.
03. Connect your Mobile Phone or Computer to the TP-Link Archer C20 router using an Ethernet cable or wi-fi. The default Network Name and Password are usually on a sticker on the bottom of the TP-Link Archer c20 wi-fi router.
04. Once your Mobile Phone or Computer is connected to the TP-Link Archer C20 router. Open a web browser, and type tplinkwifi.net. in the address field, and then press enter to visit the TP-Link Archer C20 router’s web management page.
05. Create a Login password. For security, please create a Login password for management. TP-Link Archer C20 router recommends that your password meets the following conditions. Must contain no space. Must be 6 to 32 characters long. Must contain at least two types of the following characters: letters, numbers, and symbols.
06. Then, click on Start.
07. Run the quick setup to manually configure your internet connection and wireless settings. To continue, please click the Next button.
08. Choose Operation Mode: Wireless Router.
09. Then, click on Next.
10. Select your connection type. If your internet service provider gives you public IP or static IP address. Select the static IP boxes. If your ISP provides a PPPoE username and password. Select your connection type PPPoE.
11. Then click on next.
12. Please enter your PPPoE username and password given by your internet service provider.
13. First type your PPPoE username. Then, type your PPPoE password. Confirm your PPPoE password.
14. Then click on Next.
15. Under wireless dual band selection. Please select the check box to enable the 2.4GHz and 5GHz radio band.
16. Then click on Next.
17. Customize your 2.4g wireless network name (SSID) and wireless network password (wi-fi password). Enter the wireless network name SSID for your 2.4g band wireless network.
18. Type the password you have chosen in the box next to the password for the 2.4g band. Wi-Fi password must contain at least 8 characters.
19. Then click on Next.
20. Confirm or change the wireless network name SSID. Type the wireless network name SSID for your 5g band wireless network.
21. Type the password you have chosen in the box next to the password for the 5g band. Wi-Fi password must contain at least 8 characters.
22. Then click on Next.
23. The quick setup is complete. Please confirm all parameters below. Click back to modify any settings for click save to save and apply your configurations.
24. Click on Save to finish the TP-Link Archer C20 Router Setup and Configuration.
TP-Link Router-Related Videos:
TP-Link Archer C60 Router Setup: TP-Link Archer C60 Setup and Full Con...
TP-Link TL-WR850N Router Setup: Tp-Link TL-WR850N 300Mbps Wireless N ...
TP-Link TL-WR841N Router Setup: TP-Link TL-WR841N Setup and Full Conf...
SOCIAL
===============================
Blog: https://www.wifiremon.com
Facebook Page: Facebook: wifiremon
Twitter: Twitter: wifiremon
Instagram: Instagram: wifiremon
LinkedIn: www.linkedin.com/in/wifiremon
#tplink
#tplinkrouter
#tplinkarcherc20
#tplinkarcherc20setup
#tplinkroutersetup
#wifiremon
TP-Link Router Setup Archer C20 AC750 Wireless Dual Band Router. TP-Link Archer C20 Configuration Easy Method. How to Setup your TP-Link Archer C20 Wireless Router Step by Step Tutorial. If you want to Setup your tp-link archer c20 wifi router, this video is for you.
**How to Setup TP-Link Archer C20**
01. Connect the Ethernet cable from your internet service provider to the "WAN" or "Internet" port on the back of the tp-link archer c20 router.
02. Connect one end of the included power adapter to the device and plug the other end into a wall outlet nearby. Then power on your TP-Link Archer C20 router.
03. Connect your Mobile Phone or Computer to the TP-Link Archer C20 router using an Ethernet cable or wi-fi. The default Network Name and Password are usually on a sticker on the bottom of the TP-Link Archer c20 wi-fi router.
04. Once your Mobile Phone or Computer is connected to the TP-Link Archer C20 router. Open a web browser, and type tplinkwifi.net. in the address field, and then press enter to visit the TP-Link Archer C20 router’s web management page.
05. Create a Login password. For security, please create a Login password for management. TP-Link Archer C20 router recommends that your password meets the following conditions. Must contain no space. Must be 6 to 32 characters long. Must contain at least two types of the following characters: letters, numbers, and symbols.
06. Then, click on Start.
07. Run the quick setup to manually configure your internet connection and wireless settings. To continue, please click the Next button.
08. Choose Operation Mode: Wireless Router.
09. Then, click on Next.
10. Select your connection type. If your internet service provider gives you public IP or static IP address. Select the static IP boxes. If your ISP provides a PPPoE username and password. Select your connection type PPPoE.
11. Then click on next.
12. Please enter your PPPoE username and password given by your internet service provider.
13. First type your PPPoE username. Then, type your PPPoE password. Confirm your PPPoE password.
14. Then click on Next.
15. Under wireless dual band selection. Please select the check box to enable the 2.4GHz and 5GHz radio band.
16. Then click on Next.
17. Customize your 2.4g wireless network name (SSID) and wireless network password (wi-fi password). Enter the wireless network name SSID for your 2.4g band wireless network.
18. Type the password you have chosen in the box next to the password for the 2.4g band. Wi-Fi password must contain at least 8 characters.
19. Then click on Next.
20. Confirm or change the wireless network name SSID. Type the wireless network name SSID for your 5g band wireless network.
21. Type the password you have chosen in the box next to the password for the 5g band. Wi-Fi password must contain at least 8 characters.
22. Then click on Next.
23. The quick setup is complete. Please confirm all parameters below. Click back to modify any settings for click save to save and apply your configurations.
24. Click on Save to finish the TP-Link Archer C20 Router Setup and Configuration.
TP-Link Router-Related Videos:
TP-Link Archer C60 Router Setup: TP-Link Archer C60 Setup and Full Con...
TP-Link TL-WR850N Router Setup: Tp-Link TL-WR850N 300Mbps Wireless N ...
TP-Link TL-WR841N Router Setup: TP-Link TL-WR841N Setup and Full Conf...
SOCIAL
===============================
Blog: https://www.wifiremon.com
Facebook Page: Facebook: wifiremon
Twitter: Twitter: wifiremon
Instagram: Instagram: wifiremon
LinkedIn: www.linkedin.com/in/wifiremon
#tplink
#tplinkrouter
#tplinkarcherc20
#tplinkarcherc20setup
#tplinkroutersetup
#wifiremon
2 سال پیش
در تاریخ 1401/06/18 منتشر شده
است.
74,088
بـار بازدید شده