How to use simple water level sensor with LED | Arduino Project
5.6 هزار بار بازدید -
5 سال پیش
-
How to use a water
How to use a water level sensor using arduino and LEDs.The leds indicates the water level showing the colors how deep it is.
Here are the components:
3 LEDs with different colors
Wires
Arduino
Breadboard
Water level sensor
3x 220 ohm resistors
You can buy all this components at
https://www.lazada.com
https://www.shopee.com
https://www.amazon.com
here's the schematic: https://create.arduino.cc/projecthub/...
Heres the code:
https://pastebin.com/cgqT8KmF
Song played:
Senpai Ru - Ala persona - Senpai Ru - Ala persona
How to control a servo with potentiometer and arduino -
How to control a servo w/ a potentiom...
Hope you enjoy:)
Pls like and subscribe
#ArduinoProject
Here are the components:
3 LEDs with different colors
Wires
Arduino
Breadboard
Water level sensor
3x 220 ohm resistors
You can buy all this components at
https://www.lazada.com
https://www.shopee.com
https://www.amazon.com
here's the schematic: https://create.arduino.cc/projecthub/...
Heres the code:
https://pastebin.com/cgqT8KmF
Song played:
Senpai Ru - Ala persona - Senpai Ru - Ala persona
How to control a servo with potentiometer and arduino -
How to control a servo w/ a potentiom...
Hope you enjoy:)
Pls like and subscribe
#ArduinoProject
5 سال پیش
در تاریخ 1398/06/19 منتشر شده
است.
5,668
بـار بازدید شده