How To Build a Ported SubWoofer Enclosure for a Single 10 inch | Specs Included
64.7 هزار بار بازدید -
4 سال پیش
-
After designing a ported box
After designing a ported box for my single Rockford Fosgate P3 10 inch subwoofer, it's finally time to cut out the parts and put it together! I used a table saw to carefully cut out all the parts from 3/4in MDF (Medium Density fiberboard). I cut out the subwoofer hole with a router and special guide. Then I assembled it with, drill, impact driver, liquid nails, silicone caulking. and wood screws. Thanks for Watching, have fun, and be safe!
Disclaimer: Power tools can be dangerous. be sure to read and follow all safety precautions outlined in your specific Power tool instructions. I take no responsibility for your actions.
Cut List for this 10 inch ported subwoofer enclosure design (3/4in MDF):
Front: 16.5" X 11.5"
Back: 18.5" X 11.5"
Side: 14" X 11.5"
Side: 14" X 11.5"
Top: 14" X 20"
Bottom: 14" X 20"
Big Port: 14.5" X 11.5"
Small Port: 9.75" X 11.5"
(measurements in inches)
Full video series on the way!
You can find most of these supplies and tools at your local Hardware store. Here are also some links to similar things I was using to build this enclosure:
6x2" Flat Head Phillips Screws: https://amzn.to/2VB22to (paid link)
Caulking Gun: https://amzn.to/3bk8Lyv (paid link)
Silicone Sealant Caulk, Black: https://amzn.to/2zaLfpr (paid link)
All Surface Liquid Nails: https://amzn.to/34HUtVV (paid link)
DEWALT Cordless Drill & Impact Driver Kit: https://amzn.to/2Kb8CkU (paid link)
Screwdriver Bit Set / Drill Bit Set: https://amzn.to/2ypGsQm (paid link)
Router: https://amzn.to/2wO1vM9 (paid link)
1/4" Router bit: https://amzn.to/2xGSlSb (paid link)
Router Circle cutting guide: https://amzn.to/2RMpF13 (paid link)
Hole Saw Set: https://amzn.to/3eFx7ou (paid link)
Bar clamps: https://amzn.to/2XJ3TPm (paid link)
Rafter square: https://amzn.to/2XJTrae (paid link)
Terminal Cup: https://amzn.to/2KfFfhq (paid link)
Find this Subwoofer, Amplifier, and wiring kit here:
Rockford Fosgate P3D4-10 Punch Subwoofer: https://amzn.to/376PE7T (paid link)
Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier https://amzn.to/36Y76vj (paid link)
InstallGear 4 Gauge Complete Amp wiring Kit: https://amzn.to/31ulNVX (paid link)
(I may get commissions for purchases made through links with "paid link" next to them)
music:
https://www.epidemicsound.com/referra...
Disclaimer: Power tools can be dangerous. be sure to read and follow all safety precautions outlined in your specific Power tool instructions. I take no responsibility for your actions.
Cut List for this 10 inch ported subwoofer enclosure design (3/4in MDF):
Front: 16.5" X 11.5"
Back: 18.5" X 11.5"
Side: 14" X 11.5"
Side: 14" X 11.5"
Top: 14" X 20"
Bottom: 14" X 20"
Big Port: 14.5" X 11.5"
Small Port: 9.75" X 11.5"
(measurements in inches)
Full video series on the way!
You can find most of these supplies and tools at your local Hardware store. Here are also some links to similar things I was using to build this enclosure:
6x2" Flat Head Phillips Screws: https://amzn.to/2VB22to (paid link)
Caulking Gun: https://amzn.to/3bk8Lyv (paid link)
Silicone Sealant Caulk, Black: https://amzn.to/2zaLfpr (paid link)
All Surface Liquid Nails: https://amzn.to/34HUtVV (paid link)
DEWALT Cordless Drill & Impact Driver Kit: https://amzn.to/2Kb8CkU (paid link)
Screwdriver Bit Set / Drill Bit Set: https://amzn.to/2ypGsQm (paid link)
Router: https://amzn.to/2wO1vM9 (paid link)
1/4" Router bit: https://amzn.to/2xGSlSb (paid link)
Router Circle cutting guide: https://amzn.to/2RMpF13 (paid link)
Hole Saw Set: https://amzn.to/3eFx7ou (paid link)
Bar clamps: https://amzn.to/2XJ3TPm (paid link)
Rafter square: https://amzn.to/2XJTrae (paid link)
Terminal Cup: https://amzn.to/2KfFfhq (paid link)
Find this Subwoofer, Amplifier, and wiring kit here:
Rockford Fosgate P3D4-10 Punch Subwoofer: https://amzn.to/376PE7T (paid link)
Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier https://amzn.to/36Y76vj (paid link)
InstallGear 4 Gauge Complete Amp wiring Kit: https://amzn.to/31ulNVX (paid link)
(I may get commissions for purchases made through links with "paid link" next to them)
music:
https://www.epidemicsound.com/referra...
4 سال پیش
در تاریخ 1399/01/30 منتشر شده
است.
64,789
بـار بازدید شده