How to Replace Antifreeze/Coolant for Honda/Acura - Shown on 2002 Acura TL-S
50.5 هزار بار بازدید -
6 سال پیش
-
ALWAYS MAKE SURE ENGINE IS
ALWAYS MAKE SURE ENGINE IS COOL BEFORE REMOVING RADIATOR CAP! REMOVING THE RADIATOR CAP WHILE THE ENGINE IS HOT CAN CAUSE COOLANT TO SPRAY OUT, SERIOUSLY SCALDING YOU! I AM NOT RESPONSIBLE FOR ANY INJURIES. PROCEED AT YOUR OWN RISK WITH CAUTION.
0:00 - Introduction
0:17 - Things you'll need
1:19 - Set E-Brake and turn heat up to max
2:48 - Remove front passenger wheel
3:18 - Make sure engine is cool and remove radiator cap
3:41 - Drain radiator
5:57 - Drain engine block
9:31 - Remove, empty, clean, and reinstall reservoir
10:39 - Tighten radiator drain valve
11:07 - Tighten engine block drain valve
11:31 - Dispose old coolant and put wheel back on car
12:23 - Fill radiator up to filler neck
13:02 - Leave radiator cap off and start car for 30 seconds
13:25 - Fill radiator to filler neck and reservoir to max fill line
13:50 - Put reservoir and radiator caps on
14:09 - Start car and let run until fans turn on at least twice
15:21 - Let car cool down
17:17 - Carefully remove radiator cap
17:28 - Fill radiator to filler neck and reservoir to max fill line
17:56 - Put radiator and reservoir caps back on
18:07 - Take your car on a drive to work or school
18:11 - Let car cool 100% until cold to the touch
18:27 - Fill reservoir to max fill line
18:54 - Conclusion
Parts used in this video:
- 2 gallons Honda Type 2 Antifreeze/Coolant -
https://amzn.to/37vOxBb
https://www.ebay.com/itm/For-Honda-Ac...
- 3/8" OD x 1/4" ID Clear Vinyl Tubing - https://www.menards.com/main/plumbing...
- Engine Block drain valve/breathing bolt (90030-PH7-000) - https://www.acurapartsforless.com/oem...
My recommendations to ensure a long lasting engine:
- Never let your antifreeze/coolant get dark or dirty
- Never let your coolant reservoir fluid level get below the MIN fill line
- Change your coolant every 60,000 miles or 5 years whichever comes first
- Never add any rust inhibitors or additives to your car's cooling system as there's a good chance they will not be compatible with the coolant or engine components
- Only use Genuine Honda All Season Antifreeze/Coolant Type 2! It's made very specifically for our aluminum engines to prevent corrosion and deposits in the cooling system. Seeing how this only needs to be done once every 5 years, it's worth the extra $10 over cheaper brands.
- If another brand of coolant is to be used, make sure to use a non-silicate coolant recommended for aluminum engines with a mixture of 50% antifreeze and 50% water.
Acura TL-S Type S TL CL 1999 2000 2001 2002 2003 2G 2nd Second Generation 3.2 3.2L Honda Accord Antifreeze Anti Freeze Coolant Water 50/50 Drain Replace Flush Radiator Engine Block Valve Reservoir Incineration Incin3ration
0:00 - Introduction
0:17 - Things you'll need
1:19 - Set E-Brake and turn heat up to max
2:48 - Remove front passenger wheel
3:18 - Make sure engine is cool and remove radiator cap
3:41 - Drain radiator
5:57 - Drain engine block
9:31 - Remove, empty, clean, and reinstall reservoir
10:39 - Tighten radiator drain valve
11:07 - Tighten engine block drain valve
11:31 - Dispose old coolant and put wheel back on car
12:23 - Fill radiator up to filler neck
13:02 - Leave radiator cap off and start car for 30 seconds
13:25 - Fill radiator to filler neck and reservoir to max fill line
13:50 - Put reservoir and radiator caps on
14:09 - Start car and let run until fans turn on at least twice
15:21 - Let car cool down
17:17 - Carefully remove radiator cap
17:28 - Fill radiator to filler neck and reservoir to max fill line
17:56 - Put radiator and reservoir caps back on
18:07 - Take your car on a drive to work or school
18:11 - Let car cool 100% until cold to the touch
18:27 - Fill reservoir to max fill line
18:54 - Conclusion
Parts used in this video:
- 2 gallons Honda Type 2 Antifreeze/Coolant -
https://amzn.to/37vOxBb
https://www.ebay.com/itm/For-Honda-Ac...
- 3/8" OD x 1/4" ID Clear Vinyl Tubing - https://www.menards.com/main/plumbing...
- Engine Block drain valve/breathing bolt (90030-PH7-000) - https://www.acurapartsforless.com/oem...
My recommendations to ensure a long lasting engine:
- Never let your antifreeze/coolant get dark or dirty
- Never let your coolant reservoir fluid level get below the MIN fill line
- Change your coolant every 60,000 miles or 5 years whichever comes first
- Never add any rust inhibitors or additives to your car's cooling system as there's a good chance they will not be compatible with the coolant or engine components
- Only use Genuine Honda All Season Antifreeze/Coolant Type 2! It's made very specifically for our aluminum engines to prevent corrosion and deposits in the cooling system. Seeing how this only needs to be done once every 5 years, it's worth the extra $10 over cheaper brands.
- If another brand of coolant is to be used, make sure to use a non-silicate coolant recommended for aluminum engines with a mixture of 50% antifreeze and 50% water.
Acura TL-S Type S TL CL 1999 2000 2001 2002 2003 2G 2nd Second Generation 3.2 3.2L Honda Accord Antifreeze Anti Freeze Coolant Water 50/50 Drain Replace Flush Radiator Engine Block Valve Reservoir Incineration Incin3ration
6 سال پیش
در تاریخ 1397/04/19 منتشر شده
است.
50,539
بـار بازدید شده