How to disable secure boot policy on windows 10, 8.1 and 8
208.3 هزار بار بازدید -
8 سال پیش
-
Fix An error has occurred
Fix An error has occurred setting the element data. The value is protected by Secure Boot policy and cannot be modified or deleted.
First of all try this code below on your cmd (administrator command prompt)
" bcdedit.exe /set nx AlwaysOn " copy this in to cmd without quotation mark. then hit enter ,if any error occurred use the following steps for fix the problem.
1: Open Settings
2: Find Change Advanced Start-up option
3: Restart computer from advanced start up
4: select Troubleshoot
5: Advanced Option
6: UEFI Firmware settings
7: Restart
8: F10
9: System Configuration
10: Boot Option
11: Secure Boot -change enable to Disable
12: F10
13: Press Code + Enter key for changes
After log on try the bcdedit.exe /set nx AlwaysOn on cmd it should be fine.
Just Remember The Secure Boot policy is always good for system performance so I would recommend it always Enabled. You can Enable once you finish your Computer problems.
DONATE TO DEEZ- https://www.paypal.me/deezzone
Any amount you can give is welcome..
"How to Fix windows explorer has stopped working" Fix cmd command error"
How to Disable UEFI firmware setting
How to Enable UEFI firmware setting
How to Disable/Enable secure boot policy on windows 10
How to Disable/Enable secure boot policy on windows 8
How to Disable/Enable secure boot policy on windows 8.1
Benefits of UEFI firmware settings
Why Data Execution Prevention not working
How to solve Data Execution Prevention problems
data execution prevention can't turn off
Song Credits :
Canon in D Major by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: http://incompetech.com/music/royalty-...
Artist: http://incompetech.com/
First of all try this code below on your cmd (administrator command prompt)
" bcdedit.exe /set nx AlwaysOn " copy this in to cmd without quotation mark. then hit enter ,if any error occurred use the following steps for fix the problem.
1: Open Settings
2: Find Change Advanced Start-up option
3: Restart computer from advanced start up
4: select Troubleshoot
5: Advanced Option
6: UEFI Firmware settings
7: Restart
8: F10
9: System Configuration
10: Boot Option
11: Secure Boot -change enable to Disable
12: F10
13: Press Code + Enter key for changes
After log on try the bcdedit.exe /set nx AlwaysOn on cmd it should be fine.
Just Remember The Secure Boot policy is always good for system performance so I would recommend it always Enabled. You can Enable once you finish your Computer problems.
DONATE TO DEEZ- https://www.paypal.me/deezzone
Any amount you can give is welcome..
"How to Fix windows explorer has stopped working" Fix cmd command error"
How to Disable UEFI firmware setting
How to Enable UEFI firmware setting
How to Disable/Enable secure boot policy on windows 10
How to Disable/Enable secure boot policy on windows 8
How to Disable/Enable secure boot policy on windows 8.1
Benefits of UEFI firmware settings
Why Data Execution Prevention not working
How to solve Data Execution Prevention problems
data execution prevention can't turn off
Song Credits :
Canon in D Major by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: http://incompetech.com/music/royalty-...
Artist: http://incompetech.com/
8 سال پیش
در تاریخ 1394/12/21 منتشر شده
است.
208,361
بـار بازدید شده