Chinese U-Blox NEO-M8N GY-GPSV3-NEO Module Review (Feat. U-Blox U-Center)
5.8 هزار بار بازدید -
3 سال پیش
-
It works, but it’s not
It works, but it’s not really a U-Blox NEO-M8N (firmware not updatable) …
↓↓↓ Complete description, time index and links below ↓↓↓
This video is a little bit convoluted, because some honorable Chinese manufacturer has thrown a spanner, that is a fake U-Blox NEO-M8N module, in the works. Anyway, it’s still a good intro to the U-Blox U-Center software.
After installing the U-Blox U-Center we connect the U-Blox NEO-M8N module via a USB to serial adapter. We change the baud rate, decode the boot screen and look at some version information. Then it’s time to update the firmware …
00:00 Preface – there will be a huge disappointment
00:32 Intro – a very long winded one this time
02:36 U-Center installation – nothing to it
03:13 Connecting – port and baud rate
04:08 Changing baud rate – no problem
05:50 Boot screen – some dark foreshadowing
10:01 Version – according to the UBX-MON-VER message
11:14 Firmware update – failed because of unsupported flash
16:49 Wrap-up – it’s a Chinese fake, but is mostly works, bye
Reviews • Reviews
Mailbag: GPS Module with U-BLOX NEO-M8N (incl. First Tests with Arduino MCU) • Mailbag: GPS Module with U-BLOX NEO-M...
Making Sense of NMEA 0183 Sentences – Specs & Arduino/MCU/C++ Code (1) • Making Sense of NMEA 0183 Sentences –...
FTDI FT232RL USB to Serial Module (AZ-Delivery) Detailed Review • FTDI FT232RL USB to Serial Module (AZ...
Faulty Chinese MAX31855K Modules: Fake Chips?!? (Edit: No! See Description!) • Faulty Chinese MAX31855K Modules: Fak...
U-Blox U-Center www.u-blox.com/sites/default/files/u-centersetup_v…
U-Blox 8 / M8 Receiver Description, Protocol Specification www.u-blox.com/sites/default/files/products/docume…
#gps #gnss #module #chinese #test #review #robertssmorgasbord
3 سال پیش
در تاریخ 1400/12/01 منتشر شده
است.
5,817
بـار بازدید شده