EASY GARAGE STAIRS HANDRAIL DIY: How to Build and Install Handrail to CODE!
100.3 هزار بار بازدید -
4 سال پیش
-
Whats up everyone! Easy handrail
Whats up everyone! Easy handrail install for your garage stairs entering into the house. Safe, secure, and installed to code. Wood handrail with 2x2 wood balusters. Hope you can take something from this video and incorporate it into YOUR home!
00:00 | Intro
00:52 | Cutting Handrail to Size
06:16 | Finding Height and Handrail Install
09:50 | Cutting and Installing Balusters
15:42 | All finished! PLEASE LIKE, SUBSCRIBE!
*******PLEASE NOTE*******
I am a professional at using these tools. Please use the proper safety equipment for each tool and refer to the manual for operating instructions!
TOOLS USED:
OCCIDENTAL LEATHER Tool Bag - amzn.to/3q8YBJy
TAPE MEASURE SUSPENDERS - amzn.to/30GwjgO
STANLEY 25ft. FatMax Tape Measure - amzn.to/3yHzqSi
DEWALT 12-inch Miter Saw - amzn.to/3J6FnwL
DEWALT Miter Saw Stand - amzn.to/3sk2gXC
DEWALT 20v Max Cordless Drill - amzn.to/3yJNSsN
- 10pc. Combo Kit - amzn.to/3FbgGgw
METABO 16Ga Finish Nailer - amzn.to/3e9dFkJ
METABO 18Ga Finish Nailer - amzn.to/3J715RA
METABO Air Hose 100ft. 1/4”- amzn.to/3qcmgcc
PORTER CABLE Air Compressor - amzn.to/30HKF0x
DEWALT Countersink Drill Bit Set - amzn.to/3qdXvMA
Just wrapping another house for D.R. Horton and wanted to bring you in on another home improvement. This could possibly replace a handrail that isn’t secure anymore or add this handrail for extra security walking up and down the stairs to the house.
To meet code requirements make sure your finished product height is between 36 and 38 inches. Measure from the front edge of the first stair and the front edge of the last stair to verify the top and bottom of your handrail are at the correct heights. When installing the balusters to meet code, all you need to make sure is that there is LESS than 4 inches of space between each baluster.
When working with wood material and using screws to secure that material it is always good to “pre-drill” your material. This will prevent the material from cracking and losing support. In my case I use a “counter-sink” drill bit that recesses the head of the screw into your material for a clean and secure grab of the screw.
Brick moulding is the style of casing around the door seen standing in the garage. This is a standard casing used across all different manufactures for exterior door applications. Due to the style and that my handrail intersects that casing, I cut a double bevel mitre, on the Dewalt 12” mitre saw to make a clean finish.
Please leave a comment if there is something I can do to help your home project!
********LIKE, SUBSCRIBE, and TURN ON the BELL!!!!!!!********
Special Thanks:
Youtube Copyright Free Music
4 سال پیش
در تاریخ 1399/08/17 منتشر شده
است.
100,399
بـار بازدید شده