CNC Guitar Necks | Multiple Work Coordinate system | Fusion360 and MACH 3
3.7 هزار بار بازدید -
2 سال پیش
-
Using Fusion360 and Mach3 with
Using Fusion360 and Mach3 with Multiple Work Coordinates to mill two different necks simultaneously and avoid excessive tool changes.
I'd like to think that I do a pretty good job describing the process in this one; let me know what you think.
If you like the nifty marking and measuring tool check out this link to get your own.
Drillpro Multifunction Inch and MM Woodworking Scriber Gauge
https://www.banggood.com/Drillpro-Mul...
-Check out my website. I would be happy to make an unfinished guitar, bass, or any string instrument for you. The standard method to support what I do here, both as Ideas and projects that you will see on the channel. Do you have an idea that you think would look awesome in one of these videos? Let's make it! If you need a router template set to make your design, I make those too!
https://www.twocherriesinstruments.com
-Patreon members pay $1 per month and get access to a lot of the live stream and project build Fusion 360 files, including full 3d models, CAD, and CAM. If your learning Fusion360 and following along with the live streams, this is a great way to support the content.
Patreon: Twocherriesinstruments
-Thanks to Starbond for providing the CA; you can support the channel a little with this link, and code "TwoCherriesIns" will save you a bit of change.
https://bit.ly/2XlrffX
-Follow us on Facebook and Instagram for insight on what we are up to next and some alternative content.
Instagram: twocherriesinstruments
Facebook: TwoCherriesInstruments
Thanks to Oak Studios for the music; I'm trying something different, and so far, I like it. Check them out, and let me know what you think of the music.
Patreon: posts
That's it; why are you still reading this? Go on, get, be on your way now; I have the stuff to do. I can't sit here and keep typing this. I have to stop at some point,
...
ok,
...
Thanks for watching!
...
Can You REALLY Adjust Your Truss Rod Without “BREAKING YOUR GUITAR?” How to Replace a Fretboard Inlay on a Martin D-45
Aerosol Guitar Finishing – Part 1 – Prep Sanding, Pore Filling and Sealer Coats Aerosol Guitar Finishing – Part 2 – Spraying Color Coats and Clear Coats Aerosol Guitar Finishing – Part 3 – Final Wet Sand, Buffing & Polishing
I'd like to think that I do a pretty good job describing the process in this one; let me know what you think.
If you like the nifty marking and measuring tool check out this link to get your own.
Drillpro Multifunction Inch and MM Woodworking Scriber Gauge
https://www.banggood.com/Drillpro-Mul...
-Check out my website. I would be happy to make an unfinished guitar, bass, or any string instrument for you. The standard method to support what I do here, both as Ideas and projects that you will see on the channel. Do you have an idea that you think would look awesome in one of these videos? Let's make it! If you need a router template set to make your design, I make those too!
https://www.twocherriesinstruments.com
-Patreon members pay $1 per month and get access to a lot of the live stream and project build Fusion 360 files, including full 3d models, CAD, and CAM. If your learning Fusion360 and following along with the live streams, this is a great way to support the content.
Patreon: Twocherriesinstruments
-Thanks to Starbond for providing the CA; you can support the channel a little with this link, and code "TwoCherriesIns" will save you a bit of change.
https://bit.ly/2XlrffX
-Follow us on Facebook and Instagram for insight on what we are up to next and some alternative content.
Instagram: twocherriesinstruments
Facebook: TwoCherriesInstruments
Thanks to Oak Studios for the music; I'm trying something different, and so far, I like it. Check them out, and let me know what you think of the music.
Patreon: posts
That's it; why are you still reading this? Go on, get, be on your way now; I have the stuff to do. I can't sit here and keep typing this. I have to stop at some point,
...
ok,
...
Thanks for watching!
...
Can You REALLY Adjust Your Truss Rod Without “BREAKING YOUR GUITAR?” How to Replace a Fretboard Inlay on a Martin D-45
Aerosol Guitar Finishing – Part 1 – Prep Sanding, Pore Filling and Sealer Coats Aerosol Guitar Finishing – Part 2 – Spraying Color Coats and Clear Coats Aerosol Guitar Finishing – Part 3 – Final Wet Sand, Buffing & Polishing
2 سال پیش
در تاریخ 1400/12/29 منتشر شده
است.
3,749
بـار بازدید شده