ESP32-CAM AI Thinker how to upload in Arduino with errors solved

You can finally find a working code
this code will not show any of the errors below
Failed to connect to ESP32: Timed out waiting for packet header
Camera init failed with error 0x20001 or similar
Brownout detector or Guru meditation error
Sketch too big error – Wrong partition scheme selected
Board at COMX is not available – COM Port Not Selected
Psram error: GPIO isr service is not installed
Weak Wi-Fi Signal
No IP Address in Arduino IDE Serial Monitor
Can’t open web server
The image lags/shows lots of latency
esp_camera_fb_get(): Failed to get the frame on time!
___________________________________________________________________________
Hi there! New to Royalsoft? If so, here's what you need to know -- This channel creates videos on LOTS of topics so
If You like this video follow us for more.▶😍😀
also for any question feel free to leave comments below.
Thank You 🎉🎈🎁
___________________________________________________________________________
Where else you can find me:

INSTAGRAM: Instagram: royalsoftgame

Join our growing community for new videos every week!

BUSINESS INQUIRIES

Please contact by leaving a comment with or name or email.

• #film_animation
• #esp32_cam
• #failed_to_connect_to_esp32_timed_out_waiting_for_packet_header
• #camera_init_failed_with_error_0x20001_or_similar
• #esp32_cam
• #esp32
• #esp32_cam_with_uno_board
• #ai_thinker
• #arducam
• #ardiuno_cam