Use a Shelly1 smart switch with Apple HomeKit 

1. Connect through your wifi settings on the phone to the Shelly1 wifi
2. Go on your phone’s browser to 192.168.33.1
3. Go through the webclient to connect to your local netwerk
4. Connect your phone to your local wifi network and add the Shelly switch in the Shelly app

Find your Shelly’s unique IP address via your modem (usually their app)

This IP address will lead you to the Shelly control panel


Enable for Apple Homekit

1. Open url in browser to flash Shelly:
192.xxx.x.xxx/ota?url=http://rojer.me/files/shelly/shelly-homekit-Shelly1.zip
2. reopen Shelly’s control panel 192.xxx.x.xxx
3. Set a code for Homekit xxx-xx-xxx
4. Go to Homekit and add the device

• #science_technology
• #shelly1
• #apple
• #homekit
• #smart
• #switch
• #light
• #device
• #cheap
• #shelly
• #toggle