SOLIDWORKS Flow Simulation Webinar - Rotating Regions
22.9 هزار بار بازدید -
4 سال پیش
-
Are you using SOLIDWORKS Flow
Are you using SOLIDWORKS Flow Simulation and have parts rotating at RPM? SOLIDWORKS Flow Simulation helps design your rotating parts and make fluid flow predictions through the system.
In this webinar, we will see techniques for producing fan rate curves and determine through Flow Simulation’s optimization methods approximately what speed a fan would spin at if not driven by a motor. In both cases we must learn the necessary mesh refinements required for accuracy on thin-bladed fans.
If you are interested in learning the capabilities of Flow Simulation, or are a current user and need to learn mesh refinement techniques or best practices for rotating models, then this webinar will be useful to you.
http://www.goengineer.com
Facebook: goengineer
Twitter: goengineer
LinkedIn: goengineer
In this webinar, we will see techniques for producing fan rate curves and determine through Flow Simulation’s optimization methods approximately what speed a fan would spin at if not driven by a motor. In both cases we must learn the necessary mesh refinements required for accuracy on thin-bladed fans.
If you are interested in learning the capabilities of Flow Simulation, or are a current user and need to learn mesh refinement techniques or best practices for rotating models, then this webinar will be useful to you.
http://www.goengineer.com
Facebook: goengineer
Twitter: goengineer
LinkedIn: goengineer
4 سال پیش
در تاریخ 1399/03/14 منتشر شده
است.
22,935
بـار بازدید شده