Paint or Finish Both Sides of Something #shorts
26.9 هزار بار بازدید -
پارسال
-
Design Plans:
Design Plans: https://jonpeters.com/design-plans/
Here’s a way to finish both sides of some thing… I often use this method on a table top. in this case I’m threading the screws into the holes already made for the address numbers. Generally I would finish the bottom of something first and then flip it over to the other side. The Screw tips leave a small blemish that is generally unnoticeable because it is on the back or the bottom. I was taught this trick about 30 years ago from my boss and he called these blocks of wood with screws sticking through nailers… hope this tip helps you out on your next project.
Instagram: Instagram: jonpeters_
Facebook: Facebook: 312021729836
Website: http://jonpeters.com/
#DIY, #woodworking,#homeimprovement
Here’s a way to finish both sides of some thing… I often use this method on a table top. in this case I’m threading the screws into the holes already made for the address numbers. Generally I would finish the bottom of something first and then flip it over to the other side. The Screw tips leave a small blemish that is generally unnoticeable because it is on the back or the bottom. I was taught this trick about 30 years ago from my boss and he called these blocks of wood with screws sticking through nailers… hope this tip helps you out on your next project.
Instagram: Instagram: jonpeters_
Facebook: Facebook: 312021729836
Website: http://jonpeters.com/
#DIY, #woodworking,#homeimprovement
پارسال
در تاریخ 1402/04/19 منتشر شده
است.
26,931
بـار بازدید شده