Diy Computer and Module Reset Resistor

Robert Dotterer
Robert Dotterer
4.9 هزار بار بازدید - 4 سال پیش - How to build a resistor
How to build a resistor that is used to reset modules in a vehicle. To use this you disconnect the battery and you connect this to the battery cables. You have to let this sit connected for 15min. Vehicles need to see 15mins of network silence to revert to their default programming. This may fix any strange anomalies or logic issues in a module.

Tools used:

10 watt 1 ohm resistors:
https://www.ebay.com/itm/231999882659

Marine heat shrink:
https://www.harborfreight.com/42-piec...

Ts100 soldering iron:
https://www.ebay.com/itm/253716067150

120w ac dc charger:
https://www.ebay.com/itm/192403731705
4 سال پیش در تاریخ 1399/02/18 منتشر شده است.
4,994 بـار بازدید شده
... بیشتر