Binary LED Watch - How to Read and Set Time and Date easy instructions

Erkies
Erkies
107.9 هزار بار بازدید - 7 سال پیش - This video shows how to
This video shows how to read a binary watch and how to set the time and date. Binary watches can be a bit difficult to read and many watches are tricky to set. These are easy instructions for binary style watches with the 2 vertical banks of LEDs as shown in the video.
The left side shows the hours from top to bottom. This side also has an AM indicator LED on the lower left and Date LED just below that. The Date LED is labeled "DT". The upper right column has the minutes in increments of 10s. The LEDs are labeled "10", "20", "30, "40", and "50". Below that are the single minute LEDs. To read the binary LED watch, press the upper right button to activate the time mode then, 1. the last LED number lit on the left is the hour. 2. The last number LED on upper left is the minutes in 10s then add the minutes below that for the single minute.
To read the date, press the top button twice. You should see the "DT" LED lit up on the lower left bank of LEDs. 1. Read the month on the left side bank of LEDs then 2. The day in 10s on the upper right then add the number LEDs lit in the single digits just below.
7 سال پیش در تاریخ 1396/09/20 منتشر شده است.
107,974 بـار بازدید شده
... بیشتر