Eplan Pro Panel Wiring/Routing in 3D layout space - Intro Video
3.8 هزار بار بازدید -
4 سال پیش
-
Hi, this is an introduction
Hi, this is an introduction video to the full course on my website https://www.AppliedElectricalDesign.com
This is a Vol.2 where we further upgrade our knowledge gained in the Vol.1 course where we started to work in Eplan Pro Panel from
zero, by inserting a cabinet and adding various
elements such as variable speed drive, PLC, wiring ducts, mounting rails and then also on the door various pilot devices.
In this course (Vol.2) we now learn how to wire devices / route connections both on the back plate and on the door. Very, very interesting, I've had a lot of fun filming these lessons.
For custom videos and any inquiries message me on my website.
Consider subscribing to my e-mail newsletter. More valuable content coming soon.
*DISCLAIMER:
Please note that the owner of this YouTube channel is not a certified trainer for EPLAN products nor EPLAN partner. Videos presented on this YouTube channel that are demonstrating how to work in Eplan Electric P8 computer program are solely the work of the owner of this YouTube channel and are not endorsed nor approved nor certified by the manufacturer of the aforementioned computer program. The owner of this YouTube channel also does not sell EPLAN products nor the owner of this YouTube channel is an official representative of EPLAN company or EPLAN products. For the purchase of the aforementioned computer program and/or for official training on how to use this computer program and/or for official certification and/or for official support contact the owner/manufacturer of the aforementioned computer program which is:
EPLAN Software & Service GmbH & Co. KG
An der alten Ziegelei 2
DE - 40789 Monheim am Rhein
This is a Vol.2 where we further upgrade our knowledge gained in the Vol.1 course where we started to work in Eplan Pro Panel from
zero, by inserting a cabinet and adding various
elements such as variable speed drive, PLC, wiring ducts, mounting rails and then also on the door various pilot devices.
In this course (Vol.2) we now learn how to wire devices / route connections both on the back plate and on the door. Very, very interesting, I've had a lot of fun filming these lessons.
For custom videos and any inquiries message me on my website.
Consider subscribing to my e-mail newsletter. More valuable content coming soon.
*DISCLAIMER:
Please note that the owner of this YouTube channel is not a certified trainer for EPLAN products nor EPLAN partner. Videos presented on this YouTube channel that are demonstrating how to work in Eplan Electric P8 computer program are solely the work of the owner of this YouTube channel and are not endorsed nor approved nor certified by the manufacturer of the aforementioned computer program. The owner of this YouTube channel also does not sell EPLAN products nor the owner of this YouTube channel is an official representative of EPLAN company or EPLAN products. For the purchase of the aforementioned computer program and/or for official training on how to use this computer program and/or for official certification and/or for official support contact the owner/manufacturer of the aforementioned computer program which is:
EPLAN Software & Service GmbH & Co. KG
An der alten Ziegelei 2
DE - 40789 Monheim am Rhein
4 سال پیش
در تاریخ 1399/03/11 منتشر شده
است.
3,801
بـار بازدید شده