neoVI FIRE 3: A Guided Tour

Vehicle Network Interface plus Data Logging System with CAN FD and Ethernet
16x CAN FD, 8x LIN, 3x Ethernet Interfaces

The neoVI FIRE 3 is the most advanced multi protocol vehicle network interface and data logger available. The neoVI FIRE 3 has 16x CAN FD networks, up to 8x LIN networks, 2x 1 Gb 10/100/1000BASE-T, 1x 10/100BASE-Tx.

All networks run simultaneously and are hardware time-stamped. A fully-isolated high-speed ethernet interface allows messages to be sent and received without risk of damage to the networks or your computer.

Features:

- 16x DW CAN / CAN FD channels*
- 16x software enabled CAN termination
- 8x LIN channels
- 2x SW CAN*
- 2x LSFT CAN*
- 2x DoIP activation line
- 2x 1 Gb 10/100/1000BASE-T, 1x 10/100BASE-Tx for use with DoIP, XCPoE and more
- 2x Full-size SD card slots. SD 3.0 compatible and supporting up to 2 terabytes of total storage. Up to 800 Mbps logging performance. (1x 32 GB SD card included standard)
- Real Time Clock for hardware timestamping of all messages and backup at 25ns
- Internal dual-band 802.11a/b/g/n WiFi
- 10x Programmable tri-color LEDs show link, error, and activity status
- Membrane buttons built into device case can be programmed to trigger data logs or other events
- 9 DOF IMU (accelerometer, gyroscope and magnetometer)
- Internal extended temperature battery facilitates safe shutdowns
- High precision GPS with external GPS antenna
- Buzzer

Learn more by visiting: https://intrepidcs.com/products/vehic...

#IntrepidControl #FIRE3 #neoVIFIRE #DataLogging #Multiprotocol #VehicleInterface #Gateway #CAN #CANFD #LIN #Ethernet #DoIP

Like us on Facebook: Facebook: IntrepidControl
Follow us on LinkedIn:  LinkedIn: intrepidcontrol
Follow us on Twitter: Twitter: IntrepidControl
Follow us on Instagram: Instagram: intrepidcontrol
Website: https://www.intrepidcs.com/