Send Programs to Your CNC Machine Over WiFi - ChatterSync Wireless USB Drive
900 بار بازدید -
9 ماه پیش
-
ChatterSync is an open source
ChatterSync is an open source project we made as a "wireless USB drive" to allow network file transfer to non-networked machines. Follow along as we put one together from start to finish.
GitHub repo link containing BOM, instructions, and the SD card image:
https://github.com/Chatter-Software-D...
Bill of Materials:
Raspberry Pi Zero W - $15.00 - https://rpilocator.com/?cat=PIZERO%2C...
MicroSD Card (16GB) - $8.47 - https://www.amazon.com/dp/B073K14CVB/
MicroUSB to USB-A Cable - $6.64 - https://www.amazon.com/Amazon-Basics-...
Total cost: $30.11
Learn more about Chatter: https://chatter.dev/
Join our Discord community: Discord: discord
GitHub repo link containing BOM, instructions, and the SD card image:
https://github.com/Chatter-Software-D...
Bill of Materials:
Raspberry Pi Zero W - $15.00 - https://rpilocator.com/?cat=PIZERO%2C...
MicroSD Card (16GB) - $8.47 - https://www.amazon.com/dp/B073K14CVB/
MicroUSB to USB-A Cable - $6.64 - https://www.amazon.com/Amazon-Basics-...
Total cost: $30.11
Learn more about Chatter: https://chatter.dev/
Join our Discord community: Discord: discord
9 ماه پیش
در تاریخ 1402/08/16 منتشر شده
است.
900
بـار بازدید شده