Installing Steel Siding on a Pole Barn, Trimming Windows, and Cutting Tools - Nibblers or Shears?
323.9 هزار بار بازدید -
5 سال پیش
-
Have you wondered how to
Have you wondered how to install steel siding on a pole barn?
In this video I show how easy it can be. The sheets cover 3 foot so it goes up pretty fast. I ordered my siding pre-cut to the lengths I needed so both the top and bottom edge had nice clean factory edges. Cutting the siding around window and door openings will be necessary though and for that I used a couple different tools. Hand shears from Wiss worked the best for cutting across the ribs. For ripping length-wise, I found that mechanical shears worked best. I used pneumatic shears because the cost savings over electric shears was significant. I also used an pneumatic nibbler when I only needed to go part way across a sheet. These allowed me to create and opening big enough to get the shears in to finish the opening.
This video also shows how I trimmed around my windows with a metal drip edge on top and then using J-channel around all the sides. I miter the corners for a nice picture-framed look.
Here's a link to some more great videos:
How to Build a Pole Barn Shop Series
Here's the link to the Wiss W14L Shears:
https://amzn.to/2TNEhfw
Here's the link to the Powermate Air Shears:
https://amzn.to/2TS2mlu
Here's the link to the Ingersoll Rand Air Nibbler:
https://amzn.to/2V3hInp
Here's the link to the Bosch 18V Drill:
https://amzn.to/2TOKjMG
If you enjoyed this video I hope that you please Subscribe: https://goo.gl/nPKej8
Follow us on Social Media
Instagram: Instagram: countryfamilylife
Facebook: Facebook: CountryFamilyLife
Disclaimer: Some of the links in this description may be affiliate based, which means I could earn a small commission for referring you. There is no added cost for the purchaser.
In this video I show how easy it can be. The sheets cover 3 foot so it goes up pretty fast. I ordered my siding pre-cut to the lengths I needed so both the top and bottom edge had nice clean factory edges. Cutting the siding around window and door openings will be necessary though and for that I used a couple different tools. Hand shears from Wiss worked the best for cutting across the ribs. For ripping length-wise, I found that mechanical shears worked best. I used pneumatic shears because the cost savings over electric shears was significant. I also used an pneumatic nibbler when I only needed to go part way across a sheet. These allowed me to create and opening big enough to get the shears in to finish the opening.
This video also shows how I trimmed around my windows with a metal drip edge on top and then using J-channel around all the sides. I miter the corners for a nice picture-framed look.
Here's a link to some more great videos:
How to Build a Pole Barn Shop Series
Here's the link to the Wiss W14L Shears:
https://amzn.to/2TNEhfw
Here's the link to the Powermate Air Shears:
https://amzn.to/2TS2mlu
Here's the link to the Ingersoll Rand Air Nibbler:
https://amzn.to/2V3hInp
Here's the link to the Bosch 18V Drill:
https://amzn.to/2TOKjMG
If you enjoyed this video I hope that you please Subscribe: https://goo.gl/nPKej8
Follow us on Social Media
Instagram: Instagram: countryfamilylife
Facebook: Facebook: CountryFamilyLife
Disclaimer: Some of the links in this description may be affiliate based, which means I could earn a small commission for referring you. There is no added cost for the purchaser.
5 سال پیش
در تاریخ 1397/11/28 منتشر شده
است.
323,976
بـار بازدید شده