How to install DCC and LEDs into a Proto 2000 Locomotive (part 1)
71 هزار بار بازدید -
14 سال پیش
-
Hey guys! This is
Hey guys!
This is a three part tutorial on how to install and convert your analog proto 2000 locomotive to a DCC locomotive with LED lights installed. I get my lights from Evan designs, they can be purchased from "modeltrainsoftware.com." The decoders I use are digitrax DN143IP, but a digitrax DH123PS will work just as well if you can get it to fit. The locomotive I use in this video is a walthers proto 2000 RS27. Remember, on proto 2000 locomotives the blue wire goes to the positive lead, and the white wire is the negative. LEDS withOUT capacitors will need to be installed the right way, or it will not work. Wikipedia has a good article for information on that. The led positive lead will be the smaller piece inside the bulb, and the negative is the larger
Thanks for watching!
This is a three part tutorial on how to install and convert your analog proto 2000 locomotive to a DCC locomotive with LED lights installed. I get my lights from Evan designs, they can be purchased from "modeltrainsoftware.com." The decoders I use are digitrax DN143IP, but a digitrax DH123PS will work just as well if you can get it to fit. The locomotive I use in this video is a walthers proto 2000 RS27. Remember, on proto 2000 locomotives the blue wire goes to the positive lead, and the white wire is the negative. LEDS withOUT capacitors will need to be installed the right way, or it will not work. Wikipedia has a good article for information on that. The led positive lead will be the smaller piece inside the bulb, and the negative is the larger
Thanks for watching!
14 سال پیش
در تاریخ 1389/11/19 منتشر شده
است.
71,051
بـار بازدید شده