Do Not Buy the K40 Laser........Unless

GeekBuilders
GeekBuilders
60.8 هزار بار بازدید - 5 سال پیش - This "Know Before You Buy"
This "Know Before You Buy" guide to the K40 laser engraver.

The video covers some of the basics of the system along with some of the frustrations of owning this low cost laser cutter and engraver.

There are a lot of people who have had a lot of success in getting the machine up and running, but there is also a greater number of people who have had constant difficulty in getting the system to run as an optimal part of their workshop workflow.

If you are going to take the plunge into the K40 Laser Cutter world, check out the links to the recommended guides and parts below that I have used to get up and running. The parts lists are affiliate links, so just know that you are helping out the channel is you buy something from one of those links.

--Guides--
Geeksmithing Review:
    K40 Laser Cutter/Engravers... How Are...
Geeksmithing Laser Safety:
   Making the K40 Safer!
Geeksmithing DIY Rotary:
   DIY Rotary Module for K40 Laser Engra...

One of the Best Mirror Alignment Tutorials
   https://k40laser.se/lens-mirrors/k40-...

--Upgrades and Parts--
K40 Laser Cutter
  https://amzn.to/2Uxcrad
K40 Air Assist
  https://amzn.to/39rtjDd
Cable Drag Chain
  https://amzn.to/2UOjL00
Laser Safety Glasses
  https://amzn.to/2WVJeqQ
k40 Replacement Mirrors
  https://amzn.to/2QYN4M2
Scissor Stand (To adjust work piece height)
  https://amzn.to/2UuSUqY
Focal Lens for K40
  https://amzn.to/3bDxPQy
Honeycomb Table
  https://amzn.to/3bFW3Ki

- -Follow and Subscribe--
Twitter: geekbuilders
Instagram: geekbuilders
Facebook: geekbuilder
Twitch: geekbuilders

**Check out the Making Geeks Podcast*
http://www.makinggeeks.com
5 سال پیش در تاریخ 1399/01/11 منتشر شده است.
60,811 بـار بازدید شده
... بیشتر